Volvo Penta MD6A MD7A Workshop Manual

77.

Oil the rocker arm and fit the rocker arm cover

together with new gaskets. Fit the intake

manifold and gasket and install the air cleaner.

Fit the ventilation hose between the rocker arm

cover and air cleaner.

79. Fit the key in the crankshaft. Heat the flange and

fit it on the shaft. Tighten it up with the bolt and

the thick washer. Tightening torque: 80 Nm (8

kpm = 57 lbftf). Bend down the thin washer over

the bolt head. Fit the rubber damper.

NOTE! Fit the intake manifold with the flange

displaced towards the reverse gear side in order

to provide space for the air cleaner.

80.

Install the reverse gear and gasket and connect

up the cooling water hose between the reverse

gear and water pump. Then fit the exhaust

elbow.

78.

Fit the V-belts and tension the alternator. The

belts are properly tensioned when they can be

depressed under normal thumb pressure about

3 - 4 mm (1/8”). Depress between the start-

generator and flywheel.

81.

Fill the engine and reverse gear with oil. Concer-

ning the oil quantity and quality, see under

“Technical Data”.

Product Specification

Categories	Volvo Penta Manuals
Tags	Volvo Penta MD6A, Volvo Penta MD7A
Download File	Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step. - 44 pages
Document File Type	PDF
Copyright	Attribution Non-commercial

(2 votes, average: 3.5 out of 4)

Marine readers have rated Volvo Penta MD6A MD7A Workshop Manual 3.5 out of 4.0 based on 2 product reviews.

Submit your review (optional)
Name *
Email *	(will not be displayed)
Review Title
How do you rate this item?
	1 2 3 4 5
Share your opinion:

* Required Field Check this box to confirm you are human.

Volvo Penta MD6A MD7A Workshop Manual SKU UPC Model

seg seg on Jun 30, 2015.

good manual just what I needed

Loo-Dawgie on Mar 20, 2015.

Well i haven't read it yet but it's gonna help me out when I do.