61.
Place a new gasket on the inner timing gear
cover and fit the outer timing gear casing. Two
short bolts are fitted at the bottom. Trim off any
part of the gasket which sticks out.
63. Place a new gasket on the water pump and fit it
with the two bolts. Make sure that the groove in
the pump shaft engages in the flange nut.
62.
Fit a new gasket and cover where the water
pump is to be installed. NOTE! The control
bracket is fitted with one of the bolts. Two bolts
are shorter.
64. Fit the cover with new gasket over the camshaft
end. NOTE! The bolts have three different
lengths. The Fig. below shows where they are
placed.
25
Categories | Volvo Penta Manuals |
---|---|
Tags | Volvo Penta MD6A, Volvo Penta MD7A |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(2 votes, average: 3.5 out of 4) Marine readers have rated Volvo Penta MD6A MD7A Workshop Manual 3.5 out of 4.0 based on 2 product reviews.
good manual just what I needed
Well i haven't read it yet but it's gonna help me out when I do.