X OPERATION
where it might tear away instead of activating Twist throttle grip to slowest idle position.
the stop switch.
1
2
1
3
007871
1.
Slowest idle position
1.
2.
3.
Clip
Emergency stop clip / key switch
Lanyard
DO NOT move the throttle from the slowest
position until the engine starts. Advancing the
throttle before starting sends the wrong sig-
nal to the Engine Management Module
WARNING
Always use the safety lanyard when
operating your boat to help prevent
a runaway boat and reduce the risk
of personal injury or death.
(
EMM) and will cause starting or running
problems—the outboard may not accelerate
above idle.
While seated, pull starter handle slowly until
starter engages, then pull hard. Short or slow
pulls may not provide enough energy to start
the engine.
Move the shift lever to NEUTRAL. Refer to
Shifting and Speed Control on page 20. The
engine will NOT start in gear.
Repeat, if needed, until outboard starts. To
prevent damage to starter assembly, allow
starter cord to rewind before releasing starter
handle.
1
1
2
1.
NEUTRAL
WARNING
Always shift to NEUTRAL before
starting the outboard to prevent
sudden boat movement, which can
cause injury.
1.
2. NEUTRAL
Starter handle
If the outboard does not start, refer to Trou-
bleshooting on page 35.
17
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude MFE Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 55 hp, Evinrude MJRL, Evinrude MRL |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)