2011 Evinrude 55 hp MFE MRL MJRL Outboard Boat Motor Owners Manual

FUEL AND OIL
FUEL REQUIREMENTS
WARNING
F76
or
BioDiesel
fuels.
For
combat
emergency situations  see  Emergency Fuel
on p. 13.
Gasoline   is   extremely   flammable
and  highly  explosive  under  certain
conditions.  Follow  the  instructions
in  this  section  explicitly.  Improper
handling of fuel could result in prop-
erty    damage,   serious    injury    or
death.
Gasoline
Use fresh, unleaded automotive gasoline with
an octane rating equal to or higher than:
87 (R+M)/2 AKI, or 90 RON
Use unleaded  gasoline that  contains methyl
tertiary butyl ether (MTBE) ONLY if the MTBE
content does not exceed 15% by volume.
Leaking fuel is a fire and explosion
hazard. All parts in the fuel system
should be inspected frequently and
replaced if signs of deterioration or
leakage  are  found.  Inspect  the  fuel
system  each  time  you  refuel,  each
time  you  remove the  engine  cover
and annually.
Alcohol-extended fuel is  acceptable ONLY if
the alcohol content does not exceed:
•  10% ethanol by volume; or
•  5% methanol with 5% cosolvents by volume.
Emergency Fuel
In a combat emergency when no other fuel is
Follow these  instructions to  ensure     available, diesel  DFM-F76  or BioDiesel  can
safety when handing fuel:
be used. Operating time  should be limited to
the  duration of  the  combat emergency  and
Always turn off the engine before fuel-
ing.
the operator should return to operating on one
of the approved fuels as soon as possible.
Never  permit   anyone  other  than   an
adult to refill the fuel tank.
Idle  and  low speed  operation  (below  3000
RPM)  should  be  avoided  to  prevent  spark
plug fouling  when operating  on diesel DFM-
E76 or BioDiesel.
Do not  fill the  fuel tank all  the way  to
the top or fuel may overflow when it ex-
pands due to heating by the sun.
Remove  portable fuel  tanks  from  the
boat before fueling.
IMPORTANT: If  the outboard  MUST be  run
on diesel, it should then be run on gasoline for
a minimum of 20 minutes to clean internal en-
gine components.
Always wipe off any fuel spillage.
Do not smoke, or allow open flames, or
sparks or  use electrical  devices  such
as cellular  phones in  the vicinity  of a
fuel leak or while fueling.
Fuel Additives (gasoline only)
The only fuel additives approved for use are:
Always work in a well ventilated area.
Evinrude/Johnson 2+4 Fuel Conditioner
Evinrude/Johnson Fuel System Cleaner
Evinrude  MFE models  are designed  to  use
several different fuel types. Refer to Fuel Se-    Use of  other  fuel additives  can result  in
lector switch on page 14.
poor performance or engine damage.
Evinrude/Johnson  2+4 Fuel  Conditioner will
help prevent  gum and  varnish deposits  and
will remove moisture  from the fuel system.  It
can be used continuously and should be used
during any  period when  the outboard  is  not
being operated on a regular basis.
Heavy Fuels
Approved heavy fuels include:
JP5, JP8
Jet A
Kerosene
Evinrude/Johnson
Fuel
System
Cleaner
helps keep fuel injectors in good condition.
IMPORTANT:
outboard oil MUST be used when outboard is
run on heavy fuels. DO NOT use Diesel DFM-
Evinrude/Johnson
XD100
13
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude MFE Manual, Evinrude Outboard Manual
Tags, ,
Model Year2011
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 52 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website