USING YOUR EVINRUDE E-TEC OUTBOARD
TILT SUPPORT BRACKET
TRAILERING
Trailer your boat with the outboard in a vertical position. If
your trailer does not provide adequate road clearance, tilt
the outboard as needed and support the outboard with an
accessory trailering bracket.
Engage
Raise the outboard to full TILT position. Push tilt support
bracket to “lock” position.
NOTICE
The outboard must be restrained when
trailering. Bouncing during transport may damage the
outboard and the boat’s transom.
NOTICE
Use of the tilt support bracket or tilt
lock lever when trailering may cause damage to the
outboard.
TRANSPORTING / STORAGE
1
If the outboard is laid down for transportation or storage,
the oiling system must be primed before reusing the out-
board. Refer to Priming the Oil System on page 17.
1.
Tilt support bracket – lock position
Disengage
Move tilt/run lever to RUN position. Tilt outboard fully and
pull tilt support bracket to “unlock” position. Lower out-
board.
1
1.
Tilt support lever – unlock position
24
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 65 hp, Evinrude WRL, Evinrude WRY |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)