OPERATION
Engine Stopping
Twist the throttle grip to SHIFT position or slower.
Move shift lever to NEUTRAL.
Press the STOP button until the outboard stops running. If
equipped, close the vent screw on the fuel tank’s filler cap.
1
1.
2.
Extra clip
WARNING
1
Always use the safety lanyard when operating your
boat to help prevent a runaway boat and reduce the
risk of personal injury or death.
1.
STOP button
WARNING
Emergency Stop Switch
Avoid knocking or pulling the clip off the stop
switch during normal boating. The resulting unex-
pected loss of forward motion can throw occupants
forward, causing injury.
The emergency stop switch is on the steering handle. Use
of the emergency stop feature is highly recommended on
all boats.
Connect the clip to the emergency stop switch. Snap the
lanyard to a secure place on the operator’s clothing or life
vest — not where it might tear away instead of activating
the stop switch. Disconnecting the clip and lanyard will stop
the engine and prevent the boat from becoming a runaway
if the driver moves beyond the range of the lanyard. If the
lanyard is too long, it can be shortened by knotting or loop-
ing it. DO NOT cut and retie the lanyard.
Keep the lanyard free from obstructions and entan-
glements.
At each outing, test the system’s operation. With the
engine running, remove the clip from the switch by
pulling the lanyard. If the engine does not stop run-
ning, see your Dealer.
1
2
3
1.
2.
3.
Clip
Emergency stop clip / key switch
Lanyard
An extra clip is provided on the tiller handle. If the operator
is thrown from the boat, another person can insert the extra
clip in the stop switch and start the outboard.
21
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 65 hp, Evinrude WRL, Evinrude WRY |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)