2010 Evinrude 65 hp E-TEC WRL WRY Outboard Boat Motor Owners Manual

SAFETY MEASURES — Installation and
Maintenance
Insist on the use of personal floatation devices, ap-
proved by the U.S. Coast Guard, by all passengers
when boating conditions are hazardous, and by chil-
dren and nonswimmers at all times.
The outboard must be correctly installed. Failure to
correctly install the outboard could result in serious
injury, death or property damage. We strongly rec-
ommend that your Dealer install your outboard to en-
sure proper installation.
Proceed with caution and at very low speed in shal-
low water. Grounding or abrupt stops may result in
personal injury or property damage. Also be alert for
debris and objects in the water.
Do not overpower your boat by using an engine that
exceeds the horsepower indicated on the boat’s ca-
pacity  plate.  Overpowering  could  result  in  loss  of
control. If your boat has no capacity plate, contact
your Dealer or the boat’s manufacturer.
Be familiar with the waters you are operating in. The
gearcase of this outboard extends below the water
surface and could potentially come in contact with
underwater  obstructions.  Contact  with  underwater
obstructions may result in loss of control and person-
al injury.
When replacement parts are required, use Evinrude/
Johnson  Genuine  Parts   or  parts  with  equivalent
characteristics, including type, strength and material.
Using  substandard  parts  could  result  in  injury  or
product malfunction.
Respect no wake zones, rights of other water users
and the environment. As the "skipper" and owner of
a boat you are responsible for damage to other boats
caused by the wake of your boat. Allow no one to
throw refuse overboard.
Only perform service procedures which are detailed
in this Operator’s Guide. Attempting to perform main-
tenance or repair on your outboard if you are not fa-
miliar with the correct service and safety procedure
could cause personal injury or death. Further infor-
mation   can   be   obtained   from   your  authorized
Evinrude/Johnson Dealer. In many instances proper
tools and training are required for certain service or
repair procedures.
Do not operate your boat if you are under the influ-
ence of drugs or alcohol.
High  performance   boats  have   a  high   power-to-
weight ratio. If you are not experienced in the opera-
tion of a high performance boat, do not attempt to op-
erate one at, or near, its top speed until you have
gained that experience.
Maintain your boat and engine in top condition at all
times. Adhere to the MAINTENANCE SCHEDULE
on page 33.
Become completely familiar with the control and op-
eration of your boat and outboard before embarking
on your first trip or taking on a passenger(s). If you
have not had the opportunity to do so with your Deal-
er, practice driving in a suitable area and feel the re-
sponse of each control. Be familiar with all controls
before applying the throttle above idle speed. As the
operator, you are in control and responsible for safe
operation.
Operate your boat and outboard prudently and have
fun. Do not forget that all persons must assist other
boaters in case of emergency.
Prevent injury from contact with rotating propeller; re-
move propeller before flushing or before performing
any maintenance.
8
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual
Tags, ,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 64 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website