B. Tongue
3.. Pivot.the.tongue.towards.the.trailer.as.far.as.it..
will.go.
®
Four.Winns .trailers.are.designed.with.tongue.weights.
.
between.5%.and.10%.of.the.total.weight.of.the.boat,.
fuel,.gear.and.trailer..If.the.downward.weight.on.the.
coupling.ball.does.not.fall.within.this.range,.coupler.
failure.and.towing.instability.may.occur..If.using..
another.manufacturer’s.trailer,.have.the.dealer.check.
the.tongue.weight.before.trailering.
To.reinstall,.follow.this.procedure.in.reverse.order.
1.. Pivot.the.tongue.until.the.clevis.pin.hole(s).is.
aligned.
NOTICE
When extending tongue ensure that the brake
line and wire harness are not pinched. Failure
to check could result in damage.
NOTICE
DO NOT use a bent or damaged tongue or
coupler. Replacement parts may be ordered
through a Four Winns dealer.
2..
Insert.clevis.pin(s)..Always.be.sure.to.insert.clevis..
pin(s).from.the.top.and.insert.the.clevis.pin..
keeper(s).
The.trailer.tongue.is.hinged.or.removable.on.many.of.
our.painted.trailers.and.galvanized.trailers..This.allows.
for.easier.storage..The.tongue.is.attached.with.clevis.
pin(s).with.locking.hair.pin(s).or.clevis.pin.keeper(s)..
to.the.trailer.frame..Refer.to.Figure.S-3.
NOTICE
The tongue will exert some pressure on the
clevis pin(s). It may be necessary to lift, push
or wiggle the tongue to insert the clevis pin(s).
5..
If.towing.the.trailer,.remember.to.plug.the.5-wire.
tongue.harness.to.the.trunk.connector.wire..
harness.of.your.tow.vehicle.
To.reinstall,.follow.this.procedure.in.reverse.order.
Make sure the trailer tongue is secure before
hitching to the towing vehicle.
C. Swivel Jack
Figure S-3: Trailer Tongue Assembly
The.jack.is.designed.to.lift,.lower.and.support.the.
tongues.of.the.trailers.when.not.connected.to.the.
towing.vehicle..Before.unhitching.the.trailer,.use.the.
following.guidelines.when.setting.up.the.jack.
To.pivot.the.tongue.on.trailers.models.with.exposed.
hinges:
1..
.Make.sure.the.trailer.jack.is.supporting.the.trailer.
load.properly..Refer.to.Section.S-2/C.on.Swivel.
Jacks.for.additional.information.
1.. Remove.the.lock.pin..See.Figure.S-4.
2..
Swivel.jack.to.the.vertical.position
2..
.
Remove.the.clevis.pin.keeper(s).and.clevis.pin(s)...
NOTICE
The tongue will exert some pressure on the
clevis pin(s). It may be necessary to lift, push
or wiggle the tongue to remove the clevis
pin(s).
Trailer Information - Section S
Owner’s Manual Page
Categories | Four Winns Manuals, Four Winns Vista Manuals, Outboard Marine Corporation Manuals |
---|---|
Tags | Four Winns Horizon 180, Four Winns Horizon 183, Four Winns Horizon 190, Four Winns Horizon 200, Four Winns Horizon 203, Four Winns Horizon 210, Four Winns Horizon 220, Four Winns Horizon 240, Four Winns Horizon 260 |
Model Year | 2006, 2007, 2008 |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
Document File Type | |
Publisher | fourwinns.com |
Wikipedia's Page | Outboard Marine Corporation |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)