2004 Johnson 25 30 hp WPL 2-Stroke Outboard Owners Manual

Continue to tighten propeller nut until nut slots and
cotter pin hole are   aligned. Install new cotter pin
and bend ends to secure.
1
1.
Fish line trap groove
IMPORTANT: Fish line can damage propeller shaft
seals. Damaged seals can allow water to enter the
gearcase, causing internal damage.
1.
2.
3.
4.
Thrust washer
Spacer
Propeller nut
Cotter pin
ANTICORROSION ANODES
Remove  block  of  wood.  Make  sure  engine  is  in
NEUTRAL; give propeller a spin. It must turn freely.
Your motor is equipped with one or more anodes
that protect it from galvanic corrosion. Refer to Fea-
tures for anode  location. Disintegration of the an-
ode  is  normal  and  indicates  it  is  working.  Check
each anode periodically. Replace anodes smaller
than 2/3 their original size. See your DEALER for
replacements.
Repair
If your propeller hits a solid object, the impact is par-
tially absorbed by the rubber bushing in the hub to
help prevent damage to the engine. A strong impact
can damage the hub and propeller blades. Damage
to blades can cause unusual and excessive vibra-
tion. Damage to the hub can cause excessive en-
gine RPM with little forward movement.
IMPORTANT: Avoid or limit operation using a dam-
aged propeller. Carry a spare propeller.
Keep your propeller in good condition. Use a file to
smooth  slight  damage  to  blade  edges.  See  your
DEALER for repair of serious damage.
Fish Line Trap
The thrust bushing contains a built-up groove as a
trap for fish line. Every 15 to 20 hours of operation,
or whenever you suspect the presence of fish line,
remove the propeller and check the trap. Remove
any debris.
Galvanic   corrosion   destroys   underwater   metal
parts and can occur in fresh or salt water; however,
salt,  brackish  and  polluted  waters  will  accelerate
corrosion.
Metal-based antifouling paint on the boat or motor
and the use of improperly installed shore power in
the area of your moored boat will also accelerate
corrosion.
IMPORTANT: NEVER paint the anode, its fasten-
ers, or its mounting surface. Painting will reduce its
corrosion protection.
40
- Maintenance
Product Specification
CategoriesBRP Brand Manuals, Johnson 2-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals
Tags, ,
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 56 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website