B. Fuel Injected Engines (EFI)
On fuel injected engines, starting the engine is much
easier and faster. It is not necessary to use the throttle
while in neutral to cold-start the engine. Simply turn the
key and allow the engine to warm up.
DONOTattemptcontroladjustmentsunlessyou
are familiar with control systems service proce-
dures. Control misadjustment can cause loss
of control.
For additional information, refer to the section on “Start- Other lubrication, adjustment and maintenance instruc-
ing and Operation” in the engine manufacturer’s manual tions are provided by the control manufacturer and are
included in the owner’s information packet.
included in the owner’s information packet.
F - 3
NEUTRALSAFETYSWITCH
Controlsystemsusuallyincorporateneutralsafetyswitch-
es within their design. This device prevents the engine
from being started while the shift lever is in any position
other than the neutral position. If the engine will not start,
slight movement of the shift lever may be necessary to
locate the neutral position and disengage the safety cut-
out switch. Control or cable adjustments are required to
correct this condition should it persist. See your
Four Winns® dealer for necessary control and cable ad-
justments.
F - 4
CONTROLSYSTEMMAINTENANCE
Periodic inspections of the control, cables, and all con-
nections should be made. Signs of looseness, rust, cor-
rosion, wear, cable jacket cracks or other deterioration
require immediate system servicing. Replace all dam-
aged components.
Generally,periodiclubricationofallmovingpartsandcon-
nectionswithalight,waterproofgreaseisinorder. Cables
can be lubricated by positioning them to their fullest ex-
tension and applying light grease to the inner cable near
the jacket. Working the cables back and forth will distrib-
ute the grease in the inner cable. Reapply the grease if
necessary.
Lubrication should be performed as often as necessary
to keep the system operating smoothly. Cable manufac-
turers such as Teleflex® and Morse® often offer special
tools to make cable lubrication easier.
Cable and control adjustments may become necessary.
Adjustment screws in the control, on the cables and in
the linkage are provided.
Candia FS Owner’s Manual
03/00
Section F
Page2
| Categories | Four Winns Funship Manuals, Four Winns Manuals, Outboard Marine Corporation Manuals |
|---|---|
| Tags | Four Winns Funship 214, Four Winns Funship 234, Four Winns Funship 254 |
| Model Year | 1998, 1999, 2000, 2001, 2002 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
| Document File Type | |
| Publisher | fourwinns.com |
| Wikipedia's Page | Outboard Marine Corporation |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)