3.
Deep Alarm
2.
Shallow Alarm
The DEEP ALARM can be set for depths up to 99 feet
and sounds an alarm when the depth is greater than
the setting.
The SHALLOWALARM function can be set for depths
ranging from 1 to 20 feet and sounds an alarm when
the depth is less than the setting. See Figure E9.
Press SET until the DEEP ALARM function becomes
active. This is indicated by the blinking “DEEP” icon.
The UP ARROW will activate the DEEP ALARM and
also increase the selected value. The DOWNARROW
will reduce the value. Continue to press and hold the
UP ARROW until you reach your desired value. See
Figure E12.
Figure B9: Shallow Alarm
From normal operation, pressing SET once will dis-
play the SHALLOW ALARM setting and blink the
“SHALLOW” icon. The UP ARROW will activate the
SHALLOW ALARM and also increase the selected
value. The DOWNARROW will reduce the value. Hold
the UP ARROW until you reach the desired depth set-
ting. See Figure E10.
Figure E12: Deep Alarm Setting Value
NOTICE
The minimum DEEP ALARM setting can not
meet or go below the current SHALLOW
ALARM setting.
Figure E10: Shallow Alarm Setting Value
After your selection is made, the unit will return to nor-
mal operation after 5 seconds. The “DEEP” icon should
now be visible. See Figure E13.
NOTICE
The maximum SHALLOWALARM setting can
not meet or exceed the current DEEPALARM
setting.
After your selection is made, the unit will return to nor-
mal operation after 5 seconds. The “SHALLOW” icon
should now be visible. See Figure E11.
Figure E13: “DEEP” Icon
If the depth of the water is greater than the selected
value, the alarm will sound and the icon will blink to
indicate the alarm. Pressing any button will mute the
alarm; pressing the SET will mute the alarm and acti-
vate the DEEP ALARM function for additional adjust-
ment. To permanently turn off, use the DOWN AR-
ROW to return the display to “OFF”.
Figure E11: “SHALLOW” Icon
If the depth of the water is less than the selected value,
the alarm will sound and the “SHALLOW” icon will blink
to indicate the alarm. Pressing any button will mute
the alarm; pressing SET will mute the alarm and acti-
vate the SHALLOWALARM function for additional ad-
justment. To permanently turn off, use the DOWNAR-
ROW to return the display to “OFF”.
4.
Units
The UNITS Control Function selects the UNITS of mea-
sure for depth readout and alarm functions. The three
settings available are Feet, Meters or Fathoms. See
Figure E14.
Candia FS Owner’s Manual
Section E
Page 7
0
3/00
| Categories | Four Winns Funship Manuals, Four Winns Manuals, Outboard Marine Corporation Manuals |
|---|---|
| Tags | Four Winns Funship 214, Four Winns Funship 234, Four Winns Funship 254 |
| Model Year | 1998, 1999, 2000, 2001, 2002 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
| Document File Type | |
| Publisher | fourwinns.com |
| Wikipedia's Page | Outboard Marine Corporation |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)