X OPERATION
EMERGENCY STARTING
2) Remove fuse holder from flywheel cover.
If the starter fails, your engine can be started
using a 1/4 in (6 mm) cord about 4 ft. (1.2 m)
long.
WARNING
Move the shift lever to NEUTRAL
before performing emergency start-
ing procedures. Failure to do so
may result in unexpected boat
movement.
1
The engine cover is a machinery
guard. To prevent injury from mov-
1.
Fuse
ing
engine
components,
keep
hands, clothes, and hair clear of
powerhead.
3)
Raise flywheel guard from the fittings by
pulling up on the front two fastening tabs.
Prevent electric shock by keeping
clear of the ignition coils and spark
plug leads when the outboard is
being started or is running. Shock
can cause serious personal injury
under certain conditions.
DO NOT turn flywheel by hand. Use
starter cord only.
1
Be sure:
•
•
•
Key switch is OFF.
Engine is in normal operating position.
Shift lever is in NEUTRAL.
1.
Fastening tabs
4)
Holding the flywheel guard out of the way,
hook the knot of your emergency start cord
into the notch on the flywheel. Wind the
cord clockwise in the flywheel ridge, mak-
ing one and a half full windings with the
cord.
1)
Release port and starboard side engine
cover latches downward. Pull up on the tilt
handle to release the engine cover seal
and remove the engine cover.
1
2
2
3
1
1.
2.
Engine cover latch
Tilt handle
1.
2.
3.
NEUTRAL
Knot
Rope in flywheel ridge
23
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Evinrude 75 hp, Evinrude 90 hp, Evinrude PL, Evinrude PX, Evinrude SL, Evinrude WDEL, Evinrude WDEX, Evinrude WEL, Evinrude WEX |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Publisher | evinrude.com |
| Wikipedia's Page | Evinrude Outboard Motors |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)