2010 Evinrude 55 hp MFE MRL MJRL Outboard Boat Motor Owners Manual

INSTALLATION
INSTALLATION
TRANSOM HEIGHT
WARNING
Make sure the transom height matches the length of the
outboard to be installed.
The outboard must not exceed the maximum horse-
power indicated on the boat’s capacity plate. Such
overpowering can cause loss of control. Contact the
boat’s  manufacturer  if  your  boat  lacks  a  capacity
plate.
A 48.3 to 53.3 cm (19 to 21 in.) transom height uses a
50.8 cm (20 in.) shaft outboard.
The shaft length of the outboard being installed should
match the transom height of the boat.
Boats designed for remote-steered outboards might
be overpowered  by a  tiller-steered outboard  of the
maximum rated horsepower. Refer to the boat man-
ufacturer if you are unsure.
Determine transom height by measuring from the top edge
of the transom, along the centerline.
Incorrectly  matched   boat  and  outboard   transom
heights can cause boat instability and loss of con-
trol. Refer to TRANSOM HEIGHT.
Prevent  lateral  movement  and  possible  outboard
loss  by  using  the  mounting  hardware  supplied  or
hardware  of  sufficient  size,  strength,  and  quality.
Refer to INSTALLING THE OUTBOARD on page 40.
1
3
A mounting surface that is damaged or too thin to
support  your  outboard  while  underway  might  fail
during operation, causing a loss of control. Be sure
the boat’s transom or mounting bracket is structur-
ally sound and between 41 mm (1 5/8 in.) and 70 mm
2
1.
2.
3.
Centerline
Antiventilation plate
Transom Height
(
2 3/4 in.) in thickness.
IMPORTANT: Use an appropriate hoist to lift the engine.
Refer to SPECIFICATIONS on page 38 for engine weight.
Boat performance depends on outboard mounting height.
Generally, the anti-ventilation plate of the gearcase should
align with the bottom of the hull.
Test outboard and boat performance at different heights
until the best performance is achieved.
IMPORTANT: Be sure that outboard water pressure is not
adversely affected by the mounting height of the outboard.
39
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude MFE Manual, Evinrude Outboard Manual
Document TypeBoat Motor Manual. Marine Operator's Engine Guide.
Tags, ,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 50 pages
Document File TypePDF
Publisherevinrude.com
Wikipedia's PageEvinrude Outboard Motors
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website