ENGINE SPECIFICATIONS
100, 115 Models
Displacement
Engine Type
105.4 cu. in. (1726 cc)
60° V, 4 Cylinder, Two-Cycle,
Direct Injection
Full Throttle Operating Range
Power (1)
100, 115 - 5250 to 5750 RPM
100 - 100 HP (74.6 kw) @ 5500 RPM
115 - 115 HP (85.8 kw) @ 5500 RPM
Idle RPM in Gear (2)
Ignition Timing (2)
650 ± 50
Not Adjustable
Emission Control System:
per SAE J1930 (2)
ECM, DFI (Engine Control Module, Direct Fuel Injection)
Fuel Requirements (2)
87 Pump Posted AKI (90 RON) - Refer to Fuel and Oil
Evinrude direct injection oil - Refer to Fuel and Oil
Controlled by the engine’s EMM
Oil
Warning Signals
Battery, Minimum
Spark Plug (2)(3)
500 CCA (620 MCA) 12 volt
Refer to ECI Label
Torque
15-22 ft. lbs. (20-30 N·m)
Start Assist Circuit Fuse
Fuses
Evinrude P/N 514768
Refer to Power Distribution Panel
Evinrude P/N 502906
Fuel Filter
Alternator
35-Amp, Fully Regulated
Gearcase - Lubricant
Capacity
Evinrude Ultra-HPF™ gearcase lubricant
L Models - 26 fl. oz. (770 ml)
X Models - 42 fl. oz. (1250 ml)
Pwr. Trim/Tilt - Fluid Capacity
Propeller (4)
21 fl. oz. (622 ml)
Refer to Propeller Selection
Weight (7)
L Models - 365 lbs. (166 kg)
X Models - 390 lbs. (177 kg)
Sound at Driver’s Ear
(LpA) ICOMIA 39.94
80.8 dB(A)
Transom Height
L Models - 19 1/2 to 20 in. (495 to 508 mm)
X Models - 24 1/2 to 25 in. (622 to 635 mm)
14
- General Information
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 100 hp, Evinrude 115 hp, Evinrude 135 hp, Evinrude 150 hp, Evinrude 175 hp, Evinrude 200 hp, Evinrude 225 hp, Evinrude 250 hp, Evinrude FPL, Evinrude FPX, Evinrude FSL |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)