Chapter 6: Plumbing
Electric Flush Head (If Equipped)
!
WARNING!
FLOODING and SWAMPING HAZARD!
•
Close the seawater intake seacock when leaving your boat unattended for any length of
time.
•
If the seacock is left open, a hose failure could flood the bilge, swamp the batteries and the
engine, and even sink your boat.
•
•
Read the marine head operation and
maintenance manual before using the
marine head for the first time.
The electric flush marine head uses
seawater to flush waste from the toi-
let into the holding tank.
•
•
The seawater intake valve (seacock)
must be Open for the head to work.
Check the content level of the hold-
ing tank often by looking at the side
of tank.
•
•
Empty the holding tank at every
opportunity.
The holding tank is plumbed to a
fitting on the deck for dockside
pump-out.
•
Keep the intake seacock Closed
while your boat is underway or when
the system will not be used for long
periods of time.
Winterizing the System
Read the marine head operation and
maintenance manual for winterizing
instructions.
55
Categories | Maxum Manuals |
---|---|
Tags | Maxum 2700SE |
Model Year | 2009 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)