2006 Evinrude 115 135 150 175 hp Direct Injection FPL FSL FPX FCX FHL Outboard Owners Manual

PROPELLER
WARNING
When  servicing  the  propeller,  always  shift
the outboard to NEUTRAL position, turn the
key switch OFF and disconnect battery pos-
itive  (+)   cable  so   the  engine   cannot  be
started accidentally.
IMPORTANT: Apply Triple-Guard grease to the en-
tire propeller shaft before installing the propeller. At
least annually, remove the propeller and check for
debris. Clean the shaft and regrease it before rein-
stalling a propeller.
115 FPL, FSL models
1.
2.
3.
4.
Thrust washer
Spacer
Propeller nut
Cotter pin
Installation
Slide thrust washer onto shaft with shoulder facing
aft.
Slide propeller onto shaft, engaging the splines and
seating it on the thrust bushing.
Slide spacer onto the shaft and engage the propel-
ler shaft splines.
Wedge  a  block  of  wood   between  the  propeller
blade and the anti-ventilation plate.
All other models
Install propeller nut and tighten to a torque of 70-80
ft. lbs. (95-108 N·m).
Install keeper on propeller nut, align keeper slots
and cotter pin hole.
Install new cotter pin and bend ends to secure.
All other models
115 FPL, FSL models
1.
2.
3.
4.
5.
Thrust Washer
Spacer
Propeller nut
Cotter pin
Keeper
Install Propeller nut and tighten to a torque of 120
in. lbs. (14 N·m).
Continue to tighten propeller nut until nut slots and
cotter pin hole are aligned. Install new cotter pin
and bend ends to secure.
Remove  block  of  wood.  Make  sure  engine  is  in
NEUTRAL; give propeller a spin. It must turn freely.
Repair
IMPORTANT: Avoid or limit operation using a dam-
aged propeller. Carry a spare propeller.
If your propeller hits a solid object, the impact is par-
tially absorbed by the rubber bushing in the hub to
help prevent damage to the engine. A strong impact
can damage the hub and propeller blades. Damage
to blades can cause unusual and excessive vibra-
tion. Damage to the hub can cause excessive en-
gine RPM with little forward movement.
Keep your propeller in good condition. Use a file to
smooth  slight  damage  to  blade  edges.  See  your
Dealer for repair of serious damage.
Maintenance - 47
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude Outboard Manual
Tags, , , , , , , , ,
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 62 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

One thought on “2006 Evinrude 115 135 150 175 hp Direct Injection FPL FSL FPX FCX FHL Outboard Owners Manual

  1. necesitaria el manual del motor etc evinrude 115 hp año 2012 en castellano

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website