2006 Evinrude 115 135 150 175 hp Direct Injection FPL FSL FPX FCX FHL Outboard Owners Manual

FUEL AND OIL
FUEL
Minimum Octane
Inside the U.S.
87 (R+M)/2 AKI
90 RON
WARNING
Outside the U.S.
Gasoline is extremely flammable and highly
explosive  under  certain  conditions.  Follow
the  instructions  in  this   section  explicitly.
Improper  handling  of  fuel  could  result  in
property damage, serious injury or death.
Your outboard has been designed to operate using
the above fuels;  however, be aware of the follow-
ing:
The boat’s fuel system may have different require-
ments regarding the use of alcohol fuels. Refer to
the boat’s owner guide.
Always turn off the engine before fueling.
Alcohol attracts and holds moisture that can cause
corrosion of metallic parts in the fuel system.
Alcohol  blended  fuel   can  cause  engine   perfor-
mance problems.
Never permit anyone other than an adult to
refill the fuel tank.
Do not fill the fuel tank all the way to the  top
or fuel may overflow when it expands due to
heating by the sun.
IMPORTANT: Always use fresh gasoline. Gasoline
will oxidize and weather; the result is loss of octane,
volatile compounds and the production of gum and
varnish deposits which can damage the outboard.
Remove  portable  fuel  tanks from  the  boat
before fueling.
Always wipe off any fuel spillage.
WARNING
Do  not  smoke,  or   allow  open  flames,  or
sparks or use electrical devices such as cel-
lular phones in the vicinity of a fuel leak or
while fueling.
Leaking fuel is a fire and explosion hazard.
All   parts  in   the   fuel  system   should   be
inspected  frequently  and  replaced  if  signs
of   deterioration    or   leakage   are    found.
Inspect   the  fuel   system   each   time  you
refuel,  each  time  you  remove   the  engine
cover and annually.
Always work in a well ventilated area.
Your outboard is certified to operate on unleaded
automotive gasoline with an octane rating equal to
or higher than that specified in Minimum Octane
chart. When using gasoline that contains MTBE or
alcohol, follow these guidelines:
OIL
Using unleaded  gasoline that contains methyl  ter-
tiary butyl ether (MTBE) is acceptable  ONLY if the
MTBE content does not exceed 15% by volume.
Using alcohol-extended fuels is acceptable ONLY if
the alcohol content does not exceed:
10% ethanol by volume
5% methanol with 5% cosolvents by volume
Evinrude  direct  injection  oil  is  recommended
for your Evinrude outboard. It is formulated with
special additives for the cleaning power a direct in-
jection outboard needs for longer life. This synthetic
blend  oil  also  provides  superior  lubrication  to  re-
duce engine component wear and maintain top per-
formance.
Evinrude brand oils are formulated to give best en-
gine performance while controlling piston and com-
bustion   chamber    deposits,   providing   superior
lubrication, and ensuring maximum spark plug life.
If Evinrude direct injection oil is not available you
must  use  an  NMMA-certified  TC-W3  oil  such  as
Evinrude/Johnson XD25 formula or Evinrude Bio-
degradable Outboard oil.
When operating under 32°F (0°C), Evinrude Biode-
gradable Outboard oil must be used.
IMPORTANT: Failure to follow this recommenda-
tion could void the engine warranty if a lubrication-
related failure occurs.
20
- Fuel and Oil
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude Outboard Manual
Tags, , , , , , , , ,
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 62 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

One thought on “2006 Evinrude 115 135 150 175 hp Direct Injection FPL FSL FPX FCX FHL Outboard Owners Manual

  1. necesitaria el manual del motor etc evinrude 115 hp año 2012 en castellano

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website