Remove.the.safety.pin.from.the.latch.coupler.position.
and.insert.pin.fully.into.the.reverse.lockout.position.
hole..See.Figure.S-15..Reverse.lockout.option.must.
only.be.used.when.moving.in.reverse..Immediately.
remove.pin.prior.to.towing.and.fully.insert.into.coupler.
latch.after.backing.up.is.completed.
S - 4
TRAILERING
A. Checklist
Before.trailering,.the.trailer.should.be.inspected..
for.the.following:
NOTICE
1. Check tires for proper inflation. Under-inflated tires
heat.up.rapidly.and.may.blowout.or.cause.uncon-
trolled.swaying..Also,.make.sure.lug.nuts.are.tight.
The reverse lockout position hole and actuator
hole may not be in alignment. You may have
to block the trailer’s wheels and pull the trailer
forward enough so the holes are aligned and
the safety pin may be inserted completely into
the reverse lockout position hole.
2..
3..
4..
Be.sure.the.coupler.is.secured.to.the.trailer.hitch.
and.safety.chains.are.attached.
Be.sure.trailer.taillights.and.turning.signals.are.
operational.
Check.the.brakes.for.proper.operation.prior.to.
departure.
5..
6..
Check.lug.nuts.for.proper.tightness.
Check.tie-downs.and.make.sure.boat.is.secured..
to.the.trailer.
7..
8..
Check.the.springs.and.under.carriage..
for.loose.parts.
Figure S15: Reverse Manual Brake Lockout
Before.towing,.close.and.secure.all.hatches,.
doors,.and.windows..Securely.store.all.equipment.
and.canvas..Installed.tops,.side.curtains,.and.aft.
curtains.can.be.damaged.while.towing.
Never allow the coupler latch safety pin to
remain in the reverse lockout position hole.
After reverse maneuvering, always insert
coupler latch safety pin back into the coupler
latch. Failure to remove safety pin from
reverse lockout position hole will prevent
forward movement braking which can result
in serious property damage, injury or death.
9.. Carry.a.spare.tire.for.both.the.trailer.and.towing.
vehicle..On.extended.trips,.carry.spare.wheel.
bearings,.seals,.and.races..Be.sure.and.carry..
the.proper.tools.to.complete.the.repairs.
To avoid bearing failure and possible wheel
loss, keep wheel bearings properly lubricated.
Inspect the wheel bearings periodically and
check for damage.
NOTICE
Trailer components may be different between
models and may change during the model
year. Be sure to read all manufacturer’s
literature supplied with your Four Winns
trailer.
®
10..Before.trailering,.inspect.the.bearings.for.wear..
and.adequate.lubrication..When.traveling,.check.
the.wheel.hubs.during.stops.at.gas.stations,..
restaurants.or.other.places..If.the.hub.feels..
abnormally.hot,.the.bearing.should.be.inspected.
before.continuing.the.trip.
Trailer Information - Section S
Owner’s Manual Page
| Categories | Four Winns Funship Manuals, Four Winns Manuals, Outboard Marine Corporation Manuals |
|---|---|
| Tags | Four Winns Funship 194, Four Winns Funship 204, Four Winns Funship 214, Four Winns Funship 224, Four Winns Funship 234, Four Winns Funship 244, Four Winns Funship 264, Four Winns Funship 274 |
| Model Year | 2006, 2007, 2008 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
| Document File Type | |
| Publisher | fourwinns.com |
| Wikipedia's Page | Outboard Marine Corporation |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)