FUSES
IMPORTANT: Always carry spare fuses. Use the
spare fuse holder to hold an extra fuse.
2
1.
Throttle and shift linkage
WATER PRESSURE
1
An optional water pressure gauge is recommended
to monitor cooling system pressures. Noticing
changes in water pressure can help prevent engine
overheating. The water pressure gauge must be
connected at the correct point to ensure the most
accurate pressure readings. Follow the installation
instructions included with the water pressure
gauge.
1.
2.
Fuse
Spare fuse holder
Fuse Failure
A minor electrical problem can blow a fuse. Re-
place it with a fuse of the same rating.
Repeated failures of fuses in the same position in-
dicate a serious problem. Do not replace it with
higher rated fuses; see your Dealer for service.
FUEL LINE FILTER
Fuse
30-Amp
60-Amp
Description
Sub Fuse
It is recommended a water-separating fuel filter be
installed to help prevent water that may be present
in the outboard’s fuel tank. Water in the fuel tank
can damage your outboard’s fuel injection system,
causing poor engine performance. Refer to Engine
Maintenance and Inspection Schedule for fre-
quency.
Main Fuse
An authorized Evinrude/Johnson Dealer should
service the fuel filter.
IMPORTANT: A restricted fuel delivery system will
not allow the engine fuel pump to deliver sufficient
fuel under all conditions. This can result in loss of
performance and possibly engine damage.
1
1.
Filter
44
- Maintenance
| Categories | BRP Brand Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Tags | Johnson 115 hp, Johnson 140 hp, Johnson 90 hp, Johnson CX4, Johnson PL4, Johnson PX4, Johnson X4 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)