™
378
C. Mid Cabin (Aft Cabin) Berth
to give the driver greater flexibility, increased visibility,
and riding comfort. See Figures N4 and N5.
The mid cabin provides wide open access yet with the
use of the privacy curtains or the optional bulkhead with
doors immediately becomes a private berth. Overhead
lighting and an opening window with a screen make the
mid cabin more comfortable for your guests. Storage
space is available beneath the seats, in the cedar lined
hanging closet and in the side wall closet. Push button
latches are used to secure the storage compartments
andpreventdrawers/doorsfromopeningwhileunderway.
Bolster Cushion
To operate button latches:
1.
2.
Press button latch completely to lock. When
locked button will remain depressed.
Press button latch again completely to un-
lock. The button latch will remain extended
for use as a handle to assist with opening
the drawer/door.
Figure N4: Helm Seat & Bolster
Lever
The mid cabin area can be converted into sleepingquar-
ters. The futon couch/bed assembly converts to a bed
with the aid of power assist.
To convert the mid cabin couch/bed assembly into a
berth follow the steps below:
1.
Press the left portion of the switch below the mid
cabin sliding window to activate the screw jack
which in turn extends the base of the couch aft.
2.
Once base is extended, lift and pull out futon
seat cushion which turns the couch into a bed.
Figure N5: Helm Seat Slider Mechanism
Reverse this procedure to return the futon back to the
couch position.
DO NOT sit on the backrest portion of any cock-
pit seat. The operator could lose control of the
boatorpassengerscouldbethrownfromtheboat.
The seat could also be damaged if excessive
force is applied.
N - 2
A.
EXTERIORSEATING
Helm Seat
The helm seat is adjustable and double wide so it can
seat two people comfortably. A manual, slider mecha-
nism is mounted under the driver’s seat. This allows
the driver of the boat to adjust his portion of the helm
seat to meet his or her needs. To adjust, lift the lever
below the pilot’s seat and slide the seat forward or aft to
the desired position. There is approximately six inches
ofadjustmentavailable. Thehelmseatincludesadriver’s
side flip-up bolster. By simply flipping up the bolster the
driver is able to sit higher in the seat. This is designed
B. Stern Seat
The custom U-shape stern seat includes support legs
and fiberglass base. The U-shape seating arrangement
continues around the back of the boat to create more
usable seating area. The starboard cockpit seat cush-
ion is mounted on hinge seat sliders which allows ac-
cess to the under seat storage. See Figures N6, N7 &
N8.
378
Vista™ Owner’s Manual
Section N
Page2
| Categories | Four Winns Manuals, Four Winns Vista Manuals, Outboard Marine Corporation Manuals |
|---|---|
| Tags | Four Winns Vista 378 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
| Document File Type | |
| Publisher | fourwinns.com |
| Wikipedia's Page | Outboard Marine Corporation |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)