Move the shift lever to NEUTRAL.
Loosen the lock nut, take off the NSI cable from the
bracket, and separate the end of the cable from the
cam.
1
2
1
1.
NEUTRAL
Remove the engine cover.
1.
2.
Lock nut
Cam
Lift off the recoil starter assembly.
Tie a knot in one end of the emergency starter cord.
Tie the other end around the screwdriver handle in
the tool kit.
Connect clip to the emergency stop switch / STOP
button.
Place knot of starter cord in notch on flywheel pul-
ley. Wrap cord around pulley clockwise.
Follow the starting procedure in Engine Starting.
While seated, pull hard on emergency starting cord
quickly and completely. Repeat, if necessary.
Remove the bolts securing the recoil starter in
place.
1
1.
NEUTRAL
After starting, run the engine in NEUTRAL with the
throttle at the START position for two minutes.
Then reduce speed to an idle.
DO NOT attempt to replace manual starter or en-
gine cover while engine is running. If equipped, at-
tach emergency stop switch’s lanyard to a secure
place on your clothing.
Proceed to nearest harbor for service.
Engine Starting - 23
| Categories | BRP Brand Manuals, Johnson 4-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Tags | Johnson 4 hp, Johnson 5 hp, Johnson R4, Johnson RL4 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)