NOTICE
ALWAYS read the manufacturer’s instructions
on the label before using any product.
I.
Brakes
Keep the actuator clean of dirt, tar, and mud. The actua-
tor and internal parts should be lubricated at all times
with SAE 30 weight oil. The hitch ball may be lubricated
with automotive grease or lubricant made for hitch balls.
Periodically inspect the brake system for leaks. Check
all hoses for cuts or wear. Replace all defective hoses.
The master cylinder should be filled within 1/2 inch from
the top of the reservoir.
Figure S17: Turbo Lube Hub - Front Fill Model
At the beginning of each year, inspect the brakes for
excessive wear, have linings replaced if necessary.
Turbo Lube Hub Bearing Lubrication System Mainte-
nance for Front Fill models:
If the brakes need bleeding, consult your Four Winns
dealer for assistance. If unavailable, a brake or auto
repair facility can perform the repair.
1. Remove oil filling plug from Turbo Lube cap. Add
oil into the Turbo Lube hub. See Figure S18.
Refer to the manufacturer’s literature included in the
owner’s packet for additional information on the brake
system.
J.
Bearings
Wheel bearings and seals should be inspected at the
same time as brakes. Have worn or defective parts
replaced.
Four Winns uses the Turbo Lube oil bath lubrication
system on trailerable V series model trailers. The Turbo
Lube design rotates individual roller bearings through
oil multiple times per wheel revolution. This system
keeps your hub and bearings cooler, reduces wear and
increases tow vehicle mileage. The Turbo Lube system
is submersible. With the Turbo Lube system the need
to disassemble hubs and repack the wheel bearings
is eliminated. See Figure S17.
Figure S18: Turbo Lube Oil Fill Diagram
2. Add oil until oil level is just below the filler hole.
Some time should be given to allow oil to pass
through the bearings and level off.
3. Replace oil filling plug.
4.
5.
Check oil level. Add oil if necessary (repeating
step 1,2 & 3).
Check oil level in the Turbo Lube Hub before each
trip. Add oil if required to the bottom of the filler
hole on cap.
Trailer Information - Section S
Owner’s Manual Page 197
Categories | Four Winns Manuals, Four Winns V-Series Manuals |
---|---|
Tags | Four Winns V265, Four Winns V285 |
Model Year | 2011 |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
Document File Type | |
Publisher | fourwinns.com |
Wikipedia's Page | Outboard Marine Corporation |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)