Exterior Equipment
M - 1 RAILS & DECK HARDWARE
NOTICE
All fittings must be periodically inspected for
loosening, wear, and damage. Problems
should be corrected immediately!
Hand and bow rails have been installed to provide
security for passengers while outside the cockpit area
(i.e. swim platform and bow areas). Limiting passen-
ger movement while underway is recommended. All
those on board should be safely seated whenever
possible. Additional care must be taken when in rough
seas or foul weather. Access to the foredeck should
be through the foredeck hatch when running in
adverse conditions.
The cleats that have been installed are specifically
designed and are intended to be used as mooring
cleats. Their purpose is for securing the vessel to a
dock, pier, mooring, or anchor.
Four Winns boats are not equipped with any
®
Four Winns does not recommend occupying
the foredeck during bad weather or on rough
seas. DO NOT use walk-thru instead use deck
hatches and only if absolutely necessary during
any bad weather or on rough sea conditions.
hardware designed for towing purposes. The
mooring cleats that are installed on the boat are
not to be used for towing another vessel or
having the boat towed. Refer to Section A
-
Operation for additional precautions regarding
grounding and towing.
The rail system and hardware fittings have been
selected and installed to perform specific func tions.
Fenders or mooring lines should not be secured to the
rails or stanchions. Be certain that a clear lead exists
when running dock lines or an anchor line. A line
inadvertently threaded around a stanchion or over the
rail could cause damage.
M - 2 TRANSOM DOOR
A transom door is provided and allows access from
the cockpit to the swim platform. The V265 model
uses a lift and lock style transom door. In order to
close this style of door, you must lift the door upward
from its locked position and swing the door shut until it
locks into the closed position. To open the same
procedure is used. To prevent a possible man over-
board situation, make sure the transom door is
securely locked in the closed position before each
cruise. See Figure M2.
The majority of the hardware installed is made of
stainless steel. See Figure M1. Regardless of the type
of hardware used, periodic maintenance is necessary.
Figure M1: Stainless Steel Fittings
Cleaning the hardware with a nonabrasive cleaner will
help keep the original shine and beauty. Stainless
steel hardware, while quite durable, can become
superficially rusted. This can be con trolled by cleaning
the fittings and applying a coat of wax. Any future
rusting can be removed by polishing and rewaxing.
Figure M2: V265 Transom Door
Exterior Equipment - Section M
Owner’s Manual Page 148
| Categories | Four Winns Manuals, Four Winns V-Series Manuals |
|---|---|
| Tags | Four Winns V265, Four Winns V285 |
| Model Year | 2011 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
| Document File Type | |
| Publisher | fourwinns.com |
| Wikipedia's Page | Outboard Marine Corporation |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)