X OPERATION
Emergency Stop/Key Switch
A combination emergency stop switch and
key switch is a feature of Evinrude prewired
remote controls and all Evinrude control wir-
ing kits.
WARNING
Avoid knocking or pulling the clip
off the stop switch during normal
boating. Avoid bumping the key if
operating without the clip on the
switch. The resulting unexpected
loss of forward motion can throw
occupants forward, causing injury.
1.
2.
3.
Clip
Emergency stop / key switch
Lanyard
Keep the lanyard free from obstruc-
tions and entanglements.
IMPORTANT: Carefully check the function of
all control and engine systems before leaving
At each outing, test the system’s the dock. DO NOT shift the engine into FOR-
operation. With the engine running, WARD or REVERSE while it is shut off.
remove the clip from the switch by
If the following directions are not suitable for
pulling the lanyard. If the engine
your boat’s control, see your Dealer before
does not stop running, see your
proceeding.
Dealer.
Shifting — EVINRUDE/JOHNSON
(BRP) Controls
Connect the clip to the emergency stop/key
switch. Snap the lanyard to a secure place on
the operator’s clothing or life vest — not
where it might tear away instead of activating
the stop switch. Disconnecting the clip and
lanyard will stop the engine and prevent the
boat from becoming a runaway if the driver
moves beyond the range of the lanyard. If the
lanyard is too long, it can be shortened by
knotting or looping it. DO NOT cut and retie
IMPORTANT: When shifting from FOR-
WARD to REVERSE or from REVERSE to
FORWARD, pause at NEUTRAL until the en-
gine is at idle speed and the boat has slowed.
With engine running and control handle in
NEUTRAL:
the lanyard. In an emergency situation, the Side Mount Controls
Unlock the control handle by lifting the neutral
lock lever on the hand grip. With a firm, quick
motion, move the control handle fore or aft un-
til it engages the forward or reverse gear de-
tent.
engine can be started without the clip in place.
Follow the normal starting procedure. Rein-
stall a clip as soon as possible.
IMPORTANT: Your emergency stop switch
can be effective only when in good working
condition. At each outing, inspect clip and lan-
yard for cuts, breaks, or wear. Replace worn
or damaged parts.
Binnacle Mount Controls
With a firm, quick motion, move the control
handle fore or aft until it engages the forward
or reverse gear detent.
Speed Control — EVINRUDE/
JOHNSON (BRP) Controls
After gear engagement, move the control
handle slowly in the same direction to in-
crease speed.
25
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Evinrude 200 hp, Evinrude 225 hp, Evinrude 250 hp, Evinrude 3.3 Liter, Evinrude 3.4 Liter, Evinrude 300 hp, Evinrude 90, Evinrude CX, Evinrude CZ, Evinrude HSL, Evinrude HVL, Evinrude HX, Evinrude PL, Evinrude PX, Evinrude PZ |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Publisher | evinrude.com |
| Wikipedia's Page | Evinrude Outboard Motors |
| Copyright | Attribution Non-commercial |
(2 votes, average: 2.5 out of 3)
Marine readers have rated 2011 Evinrude 200 225 250 300 hp E-TEC HSL HVL HX PL PX PZ CX CZ 3.3 3.4 Liter 90 Outboard Boat Motor Owners Manual 2.5 out of 3.0 based on 2 product reviews. not sure yet