PRODUCT INFORMATION
SPECIFICATIONS
200, 225, 250 (3.3 Liter) Models
200.1 cu. in. (3279 cc)
Displacement
Engine Type
90° V, 6 Cylinder, Two-Cycle, E-TEC
Full Throttle Operating Range
200 HP – 4500 to 5800 RPM
225 HP
250 HP
– 4500 to 5800 RPM
– 4500 to 5800 RPM
Power (1)
200 HP – 200 HP (147 kw) @ 5150 RPM
225 HP
250 HP
– 225 HP (166 kw) @ 5150 RPM
– 250 HP (184 kw) @ 5150 RPM
Idle RPM in Neutral (2)
Ignition Timing (2)
500 ± 50
Controlled by the outboard’s EMM
ECM, E-TEC (Engine Control Module, E-TEC)
Emission Control System:
per SAE J1930 (2)
Fuel Requirements (2)
87 Pump Posted AKI (90 RON) – Refer to FUEL REQUIREMENTS on page 17
Evinrude/Johnson XD100 oil or TC-W3 NMMA-certified oil
Oil
– Lubricant
– Refer to
OIL REQUIREMENTS on page 16
Warning Signals
Controlled by the outboard’s EMM
Battery, Minimum (3)(4)
675 CCA (845 MCA) 12 volt or
800 CCA (1000 MCA) 12 volt below 0°C (32°F)
Spark Plug (2)
Refer to ECI Label
(1)
(2)
(3)
(4)
Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
Emission Control Information.
Use a 1000 MCA (800 CCA) battery when operating in temperatures below 0°C (32°F).
Under extraordinary electrical load or environmental conditions, use a 107 amp-hour minimum battery (generally
available in group 29 size).
50
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 200 hp, Evinrude 225 hp, Evinrude 250 hp, Evinrude 300 hp, Evinrude CX, Evinrude CZ, Evinrude HL, Evinrude HSL, Evinrude HVL, Evinrude HX, Evinrude PL, Evinrude PX, Evinrude PZ |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)