Chapter 6: Plumbing
Marine Head & Holding Tank
NOTICE
Check with local authorities about the legal use of marine head systems.
Electric Flush Head (If Equipped)
!
WARNING!
FLOODING and SWAMPING HAZARD!
•
Close the seawater intake seacock when leaving your boat unattended for any length
of time.
•
If the seacock is left open, a hose failure could flood the bilge, swamp the batteries and the
engines, and even sink your boat.
•
•
Read the marine head opera-
tion and maintenance man-
ual before using the marine
head for the first time.
The electric flush marine
head uses seawater to flush
waste from the toilet into the
holding tank.
•
•
The seawater intake valve
(seacock) must be Open for
the head to work.
Check the content level of
the holding tank often by
looking at the side of tank.
•
•
Empty the holding tank at
every opportunity.
The holding tank is plumbed
to a fitting on the deck for
dockside pump-out.
•
Keep the intake seacock
Closed while your boat is
underway or when the sys-
tem will not be used for long
periods of time.
Winterizing the System
Read the marine head operation
and maintenance manual for
winterizing instructions.
56
| Categories | Maxum Manuals |
|---|---|
| Tags | Maxum 3100SE |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)