Chapter 6: Deck Equipment
Clear Vinyl Care
!
CAUTION
•
•
•
•
•
Never store the clear vinyl pieces wet, as this will cause a milky film to develop.
Never fold or crease the clear vinyl pieces as cracking will occur.
Clear vinyl is not intended for use when the boat is in storage or being moored.
Clear vinyl does not hold up well against ultraviolet rays.
Under direct sunlight conditions, do not let the clear vinyl touch the framework. The frame-
work radiates heat and can burn the clear vinyl.
After each use, especially in
saltwater, rinse the clear vinyl
with cold freshwater. Before
stowing, let the clear vinyl air
dry completely.
NEVER FOLD OR CREASE CLEAR VINYL!
FOLDING OR OTHERWISE CREASING
CLEAR VINYL WILL CAUSE DAMAGE
SUCH AS CRACKING TO OCCUR
•
The clear vinyl can be
rolled or laid out flat
for stowage.
•
Never fold or crease the
clear vinyl parts as crack-
ing will occur.
Regularly clean the clear
vinyl to prevent dirt, pollen,
and etc. from marring the sur-
face. Generally, it is easiest to
clean the clear vinyl while it is
installed on the boat.
1.
Hose down the clear vinyl
with freshwater.
2.
Using a soft cotton cloth
(paper towels are abra-
sive and should never be
used on clear vinyl), gen-
tly wash the clear vinyl
with soap and water.
3.
4.
Rinse the soap off
thoroughly with cold
fresh water.
Dry the clear vinyl
with a chamois or soft
cotton cloth.
AFTER CLEAR VINYL PARTS HAVE
COMPLETELY AIR DRIED THEY CAN BE
ROLLED OR SIMPLY LAID FLAT FOR STOWAGE
Ask your dealer about products available to keep the clear vinyl polished and looking new.
40
| Categories | Maxum Manuals |
|---|---|
| Tags | Maxum 2400SR3 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)