Chapter 3: Propulsion & Related Systems
Engine
Read the engine operation and maintenance manuals before starting or working on the engine.
Bilge Blower System
!
WARNING!
FIRE and EXPLOSION HAZARD!
Fuel vapors can explode! BEFORE starting the engine:
1.
Check the bilge areas for fuel vapors or leaking fuel. If you see leaking fuel or smell
fuel vapors:
a. Do NOT start the engine, do NOT turn On any electrical devices, extinguish ALL ciga-
rettes, cigars, and other sources of flame or ignition.
b. Get everyone off your boat.
c. Get trained help to find and fix the problem.
2.
Run the bilge blower for at least four minutes BEFORE engine starting, electrical system
maintenance, or activation of electrical devices.
•
If you smell fuel vapors and the engine is already running;
a. Shut Off the engine and turn Off ALL electrical devices.
b. Extinguish ALL cigarettes, cigars, and other sources of flame or ignition.
c. Get trained help to find and fix the problem.
•
NEVER obstruct or change the bilge blower system.
•
•
The bilge blower system removes explosive
fumes from the engine and bilge areas.
Fresh air is drawn into the engine and bilge
areas through the vents.
To make sure the engine and bilge areas
are properly ventilated:
•
Use the "sniff test" to check the engine and
bilge areas for fuel vapors before starting the
engine.
•
•
•
Always run the bilge blower for at least four
minutes before starting the engine.
Continue to run the blower until your boat has
reached cruising speed.
Always run the blower when running your
boat below cruising speed.
20
| Categories | Maxum Manuals |
|---|---|
| Tags | Maxum 2400SC3 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)