2009 Evinrude 40 50 60 hp E-TEC RT TL SL Outboard Boat Motor Owners Manual

X OIL AND FUEL
Remove the  engine  cover to  access the  oil   FUEL REQUIREMENTS
tank.
WARNING
Gasoline  is  extremely  flammable  and
highly  explosive  under  certain  condi-
tions.  Follow  the  instructions   in  this
section explicitly. Improper handling  of
fuel  could  result in  property  damage,
serious injury or death.
Leaking fuel is a fire and explosion haz-
ard. All parts in  the fuel system should
be inspected frequently and replaced  if
signs  of  deterioration  or  leakage  are
found.  Inspect  the   fuel  system  each
time you  refuel, each time  you remove
the engine cover and annually.
Remove the filler cap and fill the tank with the
recommended  outboard lubricant,  as  speci-
fied in Oil Requirements on page 18.
Follow   these  instructions   to   ensure
safety when handing fuel:
Always turn off the engine before fuel-
ing.
Never  permit  anyone  other  than  an
adult to refill the fuel tank.
Do not fill  the fuel tank all  the way to
the top  or fuel  may overflow  when it
expands due to heating by the sun.
Remove portable  fuel tanks  from the
boat before fueling.
Always wipe off any fuel spillage.
Do not  smoke, or allow  open flames,
or  sparks  or  use  electrical   devices
such as cellular phones in the vicinity
of a fuel leak or while fueling.
Replace  the filler  cap  and tighten  securely.
Reinstall the engine cover.
Always work in a well ventilated area.
IMPORTANT:  Always   use  fresh   gasoline.
Gasoline will oxidize;  the result is loss of  oc-
tane, volatile compounds, and the production
of gum  and varnish  deposits  which can  de-
grade the fuel system.
IMPORTANT:  The  oil  tank  capacity  is  2.0
quarts (1.9 liters).
Priming the Oil System
Minimum Octane
The oiling system must be primed before us-
ing the outboard if:
Your outboard  is certified  to operate  on un-
leaded  automotive gasoline  with  an  octane
rating equal to or higher than:
The outboard is new (check with your deal-
er to ensure oil system was primed);
You run completely out of oil; or
The outboard is laid down for transportation
or storage.
87 (R+M)/2 AKI — Inside the U.S.
90 RON — Outside the U.S.
Using unleaded gasoline that contains methyl
tertiary  butyl   ether  (MTBE)   is   acceptable
ONLY if the  MTBE content does not  exceed
Prime the oiling system by performing winter-
ization. Refer  to Long-Term Storage  (Win-
terization) on page 50 .
15%
by volume.
19
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual
Tags, , , , ,
Model Year2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 78 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website