2009 Evinrude 115 130 150 175 200 hp E-TEC PL PX SL BX HL CX HX MX Outboard Motor Owners Manual

   Product Information
RIGGING AND ACCESSORIES
PROPELLER
Standard vs. Counter Rotation
Right-hand  propellers  are  considered  stan-
dard  rotation propellers.  When  propelling  a
boat forward, the  propeller rotates in a  right-
hand (clockwise) direction as viewed from the
rear.
Propeller Selection
WARNING
Be alert of  people in the water.  Always
shift  the   outboard  to  NEUTRAL  and
shut off  the  engine immediately  when
your  boat  is  in  an  area  where   there
might be  people  in the  water. Serious
injury or death can result from contact-
ing a rotating propeller  or moving boat
and outboard.
Left-hand propellers  are considered  counter
rotation  propellers.  When propelling  a  boat
forward,  the propeller  rotates  in a  left-hand
(counterclockwise) direction  as  viewed from
the rear.
To select the correct propeller for your boating
application, your boat and outboard MUST be
water tested. See your Dealer for assistance.
IMPORTANT: The  correct propeller for  your
boat, under normal load conditions, will allow
the  engine to  run  near  the midpoint  of  the
RPM operating range at  full throttle. Refer to
Specifications on page 46.
WARNING
1.  Right-Hand (clockwise)
2.
Left-Hand (counterclockwise)
When  servicing  the  propeller,  always
shift  the  outboard  to NEUTRAL  posi-
tion, turn the key switch OFF, and twist
and remove all spark plug  wires so the
outboard  cannot  be   started  acciden-
tally.
WARNING
In dual-outboard installations, check to
are
make
sure
correct    propellers
each   outboard    before
installed
on
aggressively operating your  boat. Shift
each   engine   individually   into   FOR-
WARD or REVERSE, at idle speed  only.
If  the boat  moves  opposite  the  direc-
tion  indicated  by   the  remote  control
handle,  the wrong  propeller  has  been
IMPORTANT: Apply  Triple-Guard grease  to
the entire propeller shaft before  installing the
propeller. At  least annually, remove  the pro-
peller and  check for  debris. Clean  the shaft
and regrease it before reinstalling a propeller.
installed
checked.
on
the
outboard
being
42
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual
Tags, , , , , , , , , , , ,
Model Year2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 62 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website