2008 Yamaha Outboard VF200 VF225 VF250 Boat Owners Manual

Maintenance
Standard spark plug:
LFR6A-11
Bolt tightening torque:
8.0 Nm (0.82 kgf-m, 5.9 ft-lb)
2.
Measure  the  spark  plug   gap  using  a
thickness gauge. If the spark plug gap is
out  of  specification,  replace  the  spark
plug with the specified plug.
4.
5.
Install the ECM cover.
Install the flywheel magnet cover.
EMU40872
Inspecting engine idle speed
ECM01690
NOTICE
This procedure  must be performed  while
the outboard motor is in the water.
Inspect the engine idle speed using the Com-
mand Link  tachometer or  digital tachometer
that  is equipped  on  the  boat. Results  may
vary depending on whether testing is conduct-
ed with the outboard motor in the water.
1.
Start the engine and  allow it to warm up
fully in neutral until it is running smoothly.
Inspect the engine  idle speed. If the en-
gine  idle  speed is  out  of  specification,
consult a Yamaha  dealer or other quali-
fied mechanic.
1.
2.
3.
Spark plug gap
Spark plug part number
Spark plug I.D. mark (NGK)
2.
Spark plug gap:
.01.1 mm (0.0390.043 in)
1
Idle speed (in neutral):
750
To install the spark plug
±50 r/min
1.
Wipe off any dirt from the threads, insula-
tor, and gasket surface of the spark plug.
Install the spark plug, and  then tighten it
to the specified torque.
EMU41203
Changing engine oil
2.
ECM01710
NOTICE
Spark plug tightening torque:
Change  the  engine oil  after  the  first  20
hours of operation or 3 months, and every
28.0
Nm (2.86 kgf-m, 20.7 ft-lb)
100
Otherwise the engine will wear quickly.
hours or at 1-year intervals thereafter.
TIP:
If a torque-wrench is  not available when you
are fitting  a spark plug,  fully tighten  a spark    When  changing the engine  oil, the outboard
plug with a  spark plug wrench.  Then tighten    motor must be placed in a vertical  position. If
1/4
to 1/2 turn more. Have the spark plug ad-    you are not able to  place the outboard motor
justed to the correct torque as soon as possi-    in a vertical  position, have a Yamaha  dealer
ble with a torque-wrench.
change the engine oil.
3.
Install the  ignition coil,  and then  tighten
the bolt to the specified torque.
74
Product Specification
CategoriesYamaha Outboard Manuals
Document TypeBoat Motor Manual Free Download. Marine Operator's Boating Guide.
Tags, ,
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 100 pages
LanguageEnglish
Product BrandYamaha Motor. Yamaha Motor Corporation, USA - Support Customer Relations for US: 1-800-962-7926
Yamaha Boats: 1-800-962-7926
Yamaha Outboard Customer Relations: 1-866-894-1626 , Yamaha Outboard
Document File TypePDF
Publisheryamaha-motor.com
Wikipedia's PageYamaha Motor Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website