X OPERATION
Grasp tilt grip on engine cover and tilt out- TILT SUPPORT BRACKET
board to the full tilt position.
Engage
Raise the outboard to full TILT position. Push
tilt support bracket to “lock” position.
1
1.
Tilt grip
1
Tilt support will automatically engage.
1.
Tilt support bracket – lock position
WARNING
Disengage
While outboard is tilted, leave tilt lever
in the TILT position. When the tilt/run
lever is in the RUN position, tilt support
can release unexpectedly and allow
outboard to drop, creating a risk of
serious personal injury or loss of con-
trol.
Move tilt/run lever to RUN position. Tilt out-
board fully and pull tilt support bracket to “un-
lock” position. Lower outboard.
Tilt DOWN
Move tilt/run lever to RUN position.
1
1.
Tilt support lever – unlock position
1
TRAILERING
Trailer your boat with the outboard in a verti-
cal position. If your trailer does not provide ad-
equate road clearance, support the outboard
with an accessory trailering bracket.
1.
RUN position
IMPORTANT: The outboard must be re-
strained when trailering. Bouncing during
transport may damage the outboard and the
boat’s transom.
Grasp tilt grip on engine cover and raise out-
board slightly.
Tilt support will automatically disengage.
Slowly lower outboard to its normal operating
position.
IMPORTANT: Use of the tilt support bracket
when trailering may cause damage to the out-
board.
21
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 65 hp, Evinrude WRL, Evinrude WRY |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)