Grasp tilt grip on engine cover and tilt motor to the
full tilt position.
Grasp tilt grip on engine cover and raise motor
slightly.
Pull down the tilt lever to engage tilt support.
Pull up the tilt lever to disengage tilt support.
1
1
2
2
1.
2.
Tilt grip
Tilt lever
1.
2.
Tilt grip
Tilt lever
Slowly lower motor to its normal operating position.
WARNING
SHALLOW-WATER DRIVE
While engine is tilted, leave tilt lever in the
TILT position. When the tilt/run lever is in
the RUN position, tilt support can release
unexpectedly and allow motor to drop.
WARNING
When in shallow-water drive, your motor
has no protection from the effects of under-
water impact.
Tilt DOWN
Move tilt/run lever to RUN position.
Operate your motor in FORWARD and ONLY
at slow speed. The motor can tilt up forcibly
and drop suddenly if it hits an underwater
object or if you shift to REVERSE and apply
throttle. You could lose control.
The motor’s depth in shallow-water drive is con-
trolled by the position of the motor angle adjusting
rod. Relocate the motor angle adjusting rod if nec-
essary. Refer to Motor Angle Adjustment.
Slow the engine and shift to NEUTRAL before en-
gaging or disengaging shallow-water drive.
1
1.
Tilt/run lever – RUN position
Operation - 25
| Categories | BRP Brand Manuals, Johnson 4-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Johnson 30 hp, Johnson TEL4 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Publisher | johnson.com |
| Wikipedia's Page | Johnson Outboards |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)