OPERATION
TILTING AND TILT SUPPORT
DANGER
IMPORTANT: Use the tilt grip to tilt your motor. Do
not use the tiller handle to raise or lower the motor.
DO NOT run the engine indoors or without
adequate ventilation or permit exhaust
fumes to accumulate in confined areas.
Engine exhaust contains carbon monoxide
which, if inhaled, can cause serious brain
damage or death.
WARNING
Your motor has “impact protection” and
“reverse lock” only when the tilt/run lever is
in RUN position. If operated with the tilt/run
lever left in TILT position, the motor could
tilt into the boat suddenly, causing loss of
control or serious injury.
DANGER
Contact with a rotating propeller is likely to
result in serious injury or death. Assure the
engine and prop area is clear of people and
objects before starting engine or operating
boat. Do not allow anyone near a propeller,
even when the engine is off. Blades can be
sharp and the propeller can continue to turn
even after the engine is off. Always shut off
the engine when near people in the water.
Tilt UP
Move tilt/run lever to TILT position.
1
MOTOR ANGLE ADJUSTMENT
The motor should be perpendicular to the water
when the boat is underway at full speed. This ad-
justment can only be determined by water testing
the boat. Set angle adjustment for your normal
load.
Place motor in full tilt position. Refer to Tilting and
Tilt Support.
1.
Tilt/run lever – TILT position
Move angle adjusting rod as shown.
24
- Operation
| Categories | BRP Brand Manuals, Johnson 4-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Johnson 30 hp, Johnson TEL4 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Publisher | johnson.com |
| Wikipedia's Page | Johnson Outboards |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)