X SPECIFICATIONS
150,
175, 200 Models
Displacement
Engine Type
158.2 cu. in. (2592 cc)
60° V, 6 Cylinder, Two-Cycle, E-TEC
Full Throttle Operating
Range
150 HP – 4850 to 5850 RPM
175
200
HP – 4850 to 5850 RPM
HP – 4850 to 5850 RPM
Power(1)
150 HP – 150 HP (111.9 kw) @ 5350 RPM
175
200
HP – 175 HP (130.5 kw) @ 5350 RPM
HP – 200 HP (149.1 kw) @ 5350 RPM
Idle RPM in Gear(2)
Idle RPM in Neutral(2)
Ignition Timing(2)
500 ± 50
500 ± 50
Controlled by the outboard’s EMM
Emission Control System: ECM, E-TEC (Engine Control Module, E-TEC)
per SAE J1930(2)
Fuel Requirements(2)
87 Pump Posted AKI (90 RON) – Refer to Oil and Fuel on
page 17
Oil – Lubricant
Evinrude/Johnson XD100 oil or TC-W3RL NMMA-certified oil
–
Refer to Oil and Fuel on page 17
Warning Signals
Controlled by the outboard’s EMM
Battery, Minimum(3)(4)
675 CCA (845 MCA) 12 volt or
750
CCA (940 MCA) 12 volt below 32°F (0°C)
Spark Plug(2)
Fuses
Refer to ECI Label
P/N 967545 – Refer to Fuse on page 30
P/N 502906
Fuel Filter
Battery Charging
Gearcase – Lubricant
50-Amp, Fully Regulated, Dual Isolated
Evinrude Ultra-HPF™
–
Capacity
L Models – 33.1 fl. oz. (980 ml)
X Models (Standard Rotation) – 44 fl. oz. (1300 ml)
X Models (Counter Rotation) – 41 fl. oz. (1220 ml)
Power Trim/Tilt – Fluid
Evinrude/Johnson Power Trim/Tilt and Power Steering Fluid
–
Capacity
21 fl. oz. (622 ml)
Propeller
Weight
Refer to Propeller Selection on page 42
L Models – 418 lbs. (190 kg)
X Models – 433 lbs. (196 kg)
Sound at Driver’s Ear
(LpA) ICOMIA 39.94
79.0 dB(A)
Transom Height
L Models – 19 1/2 to 20 in. (495 to 508 mm)
X Models – 24 1/2 to 25 in. (622 to 635 mm)
47
Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
---|---|
Tags | Evinrude 115 hp, Evinrude 150 hp, Evinrude 175 hp, Evinrude 200 hp, Evinrude CX, Evinrude HL, Evinrude PL, Evinrude PX, Evinrude SL |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)