ENGINE MAINTENANCE AND INSPECTION SCHEDULE
Routine maintenance is necessary for all mechanized products. Periodic maintenance contributes to the
product’s life span. The following maintenance chart provides guidelines for engine maintenance and in-
spection scheduled to be performed by you and/or by an authorized Dealer. The schedule should be ad-
justed according to operating conditions and use.
The recommended lubricants have been formulated to protect bearings, gears and engine components.
They must be used to avoid damage caused by improper lubrication.
IMPORTANT: Schedules for rental operations, commercial applications or high hour use will require
greater frequency of inspection and maintenance.
Engine Maintenance and Inspection Schedule
Frequency
Engine Care
Product
Description
Swivel bracket, inspect and lubricate (1)
6
6
6
6
Every 60 days / Every 30 in Saltwater
Every 60 days / Every 30 in Saltwater
Every 60 days / Every 30 in Saltwater
Every 60 days / Every 30 in Saltwater
Throttle and shift linkage, inspect and lubricate (1)
Clamp screws, lubricate (1)
Swivel bracket / tilt support bracket, inspect and lubricate (1)
Lubrication and corrosion protection for metallic
components
4
6
Every 60 days / Every 30 in Saltwater
Battery connections and condition, verify
O
D
System Check self-test and warning horn, verify
operation
O
D
Anticorrosion anodes and bonding wires, verify
operation
O
D
Water intake screens, verify condition
Overboard water pump indicator, verify operation
Steering friction check, verify function
Throttle and shift operation, verify function
Emergency stop circuit and lanyard, verify function
Crankcase oil level, check
O
O
O
O
O
O
O
O
D
D
D
D
D
D
Flush cooling system
Clamp screws, tighten
Fuel components, inspect and repair leaks (2)
D
D
D
D
D
D
D
D
D
Fastener inspection, tighten loosened components
Thermostat, inspect and verify operation (2)
D
D
D
D
D
Engine to transom mounting hardware, re-torque
Electrical and ignition wires and connections, inspect
Gearcase lubricant replace
5
6
Powerhead synchronization and linkage, inspect (2)
Engine upper and lower motor covers, clean and wax
O
D
Gearcase lubricant, inspect fill level and condition of
lube
5
8
Starter pinion shaft, inspect and lubricate (3)
D
Maintenance - 45
| Categories | Johnson 4-Stroke Manuals, Johnson Outboard Manuals |
|---|---|
| Tags | Johnson 30 hp, Johnson PL4 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)