PROPELLER SELECTION
See your Dealer for a flushing device designed to fit
your engine. Follow manufacturer’s instructions for
installing and using it.
To select the correct propeller for your boating ap-
plication, your boat and motor MUST be water test-
ed. See your Dealer for assistance.
Refer to Propeller, before removing or installing
propeller.
IMPORTANT: Before flushing the engine on a
flushing device, you must cover the auxiliary water
intake under the antiventilation plate with tape to
make sure enough water will travel to the engine.
Remember to remove the tape after flushing the en-
gine.
IMPORTANT: The correct propeller for your boat,
under normal load conditions, will allow the engine
to run near the midpoint of the RPM operating
range at full throttle. Refer to Engine Specifica-
tions.
MOORING
You may moor your boat with the motor’s gearcase
out of the water by using its tilt feature. Depending
on the model, refer to Tilt Support or Power Trim
and Tilt.
1
FLUSHING
1.
Auxiliary water intake
DANGER
DO NOT run the engine indoors or without
adequate ventilation or permit exhaust
fumes to accumulate in confined areas.
Engine exhaust contains carbon monoxide
which, if inhaled, can cause serious brain
damage or death.
DO NOT use the flushing port on the starboard side
of the gearcase. Using this flushing port will restrict
water supply to the engine, causing damage.
1
1.
Flushing port – DO NOT USE
Operation - 29
| Categories | BRP Brand Manuals, Johnson 4-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Tags | Johnson 40 hp, Johnson PL4, Johnson50 hp |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated 2005 Johnson 40 50 hp PL4 4-Stroke Outboard Owners Manual 5.0 out of 5.0 based on 1 product reviews. Having a problem trying to download this item.