Replace any worn or damaged parts. For more
information on maintenance, refer to the manufact-
urer’s literature included in the owner’s packet.
DO NOT burn damaged or broken bunks.
Toxic fumes will be released. Dispose of
bunks properly.
F. Lights
Inspect wiring for cuts or bare wire which could cause
electrical shorts. Repair or replace defective wiring.
Replace cracked or damaged lens and always carry
spare bulbs. Replacement parts may be ordered
through a Four Winns dealer.
C. Swivel Jack
Keep the swivel jack clean of dirt, tar, and mud.
Lubricate every six months. The swivel jack’s inner
ram should be lubricated with SAE 30 weight oil. The
top cover may be removed to lubricate the gears with
wheel bearing grease.
G. Tie-downs
Replace frayed or damaged tie-downs. Periodically,
lubricate the ratchet mechanism with a fine oil or
silicone spray. Replacement parts may be ordered
Replace all worn and damaged parts. ALWAYS use
the manufacturer’s replacement parts. Replacement
parts may be ordered through your Four Winns dealer. through a Four Winns dealer.
For more information on maintenance, refer to the
manufacturer’s literature included in the owner’s
packet.
H. Wheels
Some maintenance is required to maintain the finish
and retard rusting of painted rims. The wheels should
be cleaned with dishwashing soap and water and
rinsed with clean water immediately after each use.
Waxing is recommended three to four times each
year.
D. Brake Actuator & Coupling Assembly
When storing or parking your trailer, keep the brake
actuator and coupling assembly (coupler) off the
ground to prevent dirt buildup in the ball socket. Keep
the coupler clean of dirt, tar, and mud. Lubricate the
coupler with SAE 30 weight oil every six months or as
often as necessary. Replace any worn or defective
parts. If the coupler is damaged, contact your Four
Winns dealer for replacement parts. DO NOT use a
damaged or bent coupler assembly.
Aluminum wheel rims may be cleaned with dishwas-
hing soap and water. However, cleaning products
specifically for aluminum are available and can be
used. Cleaners may be obtained from Four Winns
dealers and your local auto parts stores. The Mag
wheel manufacturer recommends a product by Priority
One called Pro-Long Aluminum/Chrome Wheel
®
Protectant™. Galvanized rims should be rinsed only
with clean water immediately after each use.
For more information on maintenance, refer to the
manufacturer’s literature included in the owner’s
packet.
NOTICE
ALWAYS read the manufacturer’s instructions
on the label before using any product.
NOTICE
The trailer should be set up at a slight angle to
allow for water to drain aft in the boat.
I.
Brakes
E. Winch
Keep the actuator clean of dirt, tar, and mud. The
actuator and internal parts should be lubricated at all
times with SAE 30 weight oil. The hitch ball may be
lubricated with automotive grease or lubricant made
for hitch balls.
The winch should be kept clean of dirt, ice, paint, etc.,
and the spur gears should have a film of grease on
them at all times. Apply several drops of SAE 30
weight oil to the ratchet pawl mechanism, bushings
and pinion shaft threads twice per season.
Periodically inspect the brake system for leaks.
Check all hoses for cuts or wear. Replace all defective
Trailer Information - Section S
Owner’s Manual Page
| Categories | Four Winns Manuals, Four Winns Vista Manuals, Outboard Marine Corporation Manuals |
|---|---|
| Tags | Four Winns Vista 258, Four Winns Vista 278 |
| Model Year | 2005, 2006, 2007, 2008 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
| Document File Type | |
| Publisher | fourwinns.com |
| Wikipedia's Page | Outboard Marine Corporation |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated 2005-2008 Four Winns Vista 258 278 Boat Owners Manual 5.0 out of 5.0 based on 1 product reviews.