other equipment could occur if water is allowed to
freeze in the bilge. Refer to the manufacturers litera-
ture included in the owner’s packet for additional
information.
Be sure the drain plug is securely in place prior
to launching the boat. Upon shipment of the
boat, the drain plug is usually taped to the
steering wheel.
C. Sump
A sump box is installed in the floor, just forward of the
®
aft cabin. See the 258 and 278 Vista locator drawing
B. Bilge Pumps
at the back of this manual. It is equipped with an
automatic float switch and will pump water overboard
or into the grey water tank (if available). Refer to
Section J-2D on using the shower and for additional
information on sump pump operation.
Forward and aft bilge pumps are provided in the
bottom of the hull to remove miscellaneous water
accumulations that might occur during normal boating
or weather conditions. The aft bilge pump is controlled
by the BILGE PUMP switch located on the port helm
switch panel. Refer to Section H for further information
regarding bilge pumps.
D. Bilge Compartment Drainage
Certain bulkhead areas of Four Winns boats are
®
The bilge pumps are equipped with an automatic
switch to control pump operation. As the water level
rises, the automatic float switch will activate the pump.
Separate circuit breakers are provided on the battery
switch to supply power directly from the “SHIP SYS-
TEMS” battery to the forward and aft bilge pumps
regardless of battery selector switch position.
sealed in accordance with US Coast Guard regula-
tions effective at the date of manufacture. Drainage
is provided and water can be removed with the bilge
pump.
E. Cockpit Drainage
The 258 and 278 Vista models incorporate a fiber-
®
NOTICE
glass self-bailing cockpit. This feature minimizes water
entry to the bilge or engine compartment areas by
providing means for water to be drained overboard.
While at rest, any bilge water accumulation
may flow forward. DO NOT allow bilge water
to accumulate. Damage to the engine or other
components may result. Periodically operate
the bilge pump to remove bilge water
accumulation.
Periodically open the engine hatch and clean the
aft bilge compartment. Be sure the drains, tubes and
fittings are clean and free of leaves, dirt, or other
debris.
When leaving the boat unattended for long periods of
time or during excessive rain storms, it is a good idea
to check on the boat for excessive water accumula-
tion. Be sure the bilge pumps and automatic float
switches are operating properly. The operating time of
the bilge pumps will be limited to the battery capacity.
Periodically, clean the bilge pump strainers. DO NOT
allow dirt and debris to clog the bilge pump intakes.
Check operation of the bilge pump float switch often to
ensure movement of the switch is not restricted by
debris, portions of the hull, etc.
Wipe up any oil accumulation in the bilge prior to
activation of the bilge pumps. Pumping oil overboard
will pollute the water, and is subject to fine.
After winterization of the fresh water systems, be sure
the bilge area, bilge pumps and associated hoses are
thoroughly dry. Damage to the hull, bilge pumps and
Ventilation and Drainage Systems - Section K
Owner’s Manual Page
| Categories | Four Winns Manuals, Four Winns Vista Manuals, Outboard Marine Corporation Manuals |
|---|---|
| Tags | Four Winns Vista 258, Four Winns Vista 278 |
| Model Year | 2005, 2006, 2007, 2008 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
| Document File Type | |
| Publisher | fourwinns.com |
| Wikipedia's Page | Outboard Marine Corporation |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated 2005-2008 Four Winns Vista 258 278 Boat Owners Manual 5.0 out of 5.0 based on 1 product reviews.