Fiberglass and Hull Information
P - 1 HULL DESIGN INFORMATION
P - 3 EQUIPMENT INSTALLATION
Four.Winns
®
.boats.are.designed.using.the.sound.
Many boats are used for specific purposes or under
conditions.which.require.the.addition.of.special.
equipment.to.the.hull.or.deck..Special.care.must.be.
taken.during.the.installation.of.any.equipment.to.a.
fiberglass component. A polysulfide or butyl based
sealant.should.be.used.to.seal.installations.below.the.
water line. Silicone “marine” seal or similar bedding
compound.should.be.used.elsewhere.
engineering.and.mathematical.principles.of.hydro-
statics,.hydrodynamics,.structure,.and.strength.of.
materials..The.materials.utilized.provide.optimum.
strength.at.the.lightest.possible.weight..The.exact.
fiberglass laminate schedule and construction .
techniques.of.each.part.is.determined.in.accordance..
with.the.strength.and.rigidity.required.
NOTICE
P - 2 FIBERGLASS CONSTRUCTION
DO NOT install any item onto or through the
hull without adequately sealing the hull area
penetrated by the installed item or related
fasteners. Improper installations could cause
leakage or allow water absorption and thus
cause serious hull damage.
The fiberglass components of Four Winns .boats..
®
are of the finest quality materials, workmanship .
and.construction.techniques.available..This.ensures.
the.structural.integrity.to.provide.years.of.boating.
enjoyment.with.minimal.maintenance.
Always pre-drill fastening holes with a proper
size bit. Pre-drilling will help prevent the
fiberglass from splintering and thus causing
unsightly damage. Also, countersink holes to
prevent the gel coat from chipping.
The.construction.of.a.Four.Winns .hull.begins.with..
®
the.application.of.gel.coat.to.the.mold..The.gel.coat..
is.approximately.25.mils.thick..A.coat.of.resin.and.
chopped fiberglass is then sprayed into the hull and
carefully hand rolled until it is securely affixed to .
the.gel.coat.
Any.equipment.which.will.be.subjected.to.cyclic.
loading or significant force should be through-bolted .
to a fiberglass component. A butt block or backing
plate.should.be.used.to.strengthen.any.area.onto.
which.an.item.will.be.mounted.
A number of fiberglass layers and woven roving are
applied.to.the.above.laminate..Each.layer.is.hand..
laid.and.hand.rolled..The.keel.and.chine.areas.have.
fiberglass woven roving overlapped in these areas .
to.provide.additional.strength..Most.Vista .models.
®
utilize.encapsulated.end-grain.balsa.core.or.coremat.
laminates.to.achieve.additional.rigidity..Others.utilize.
additional.laminations.of.woven.roving.to.maintain.
strength.and.rigidity.
P - 4 FIBERGLASS CARE & MAINTENANCE
Fiberglass.is.affected.by.weathering.processes.and.
requires.maintenance.on.a.periodic.basis.to.help.
maintain.the.beauty.and.shine..The.effects.upon.the.
gel.coat.will.be.dependent.upon.boating.conditions,.
storage,.type.of.use,.and.the.care.given.to.the.boat.
during.the.boating.season.
The.hull.support.stringers.are.located.using.special.
tools, and are fiberglassed and/or bonded into place.
This.ensures.a.strong,.rigid.hull,.permanently.formed.
into.a.solid.assembly,.free.of.distortions.
Four Winns utilizes fade-fighting gel coat in the
exterior finish. It is specially formulated to resist fading
and.yellowing,.and.retain.more.of.its.original.gloss.
than.better.grade.gel.coats..However,.it.is.still.impor-
tant to maintain the gel coat to protect the finish.
Fiberglass.cockpit.liners.and.seat.base.are.construct-
ed.similar.to.the.hull..Balsa.core.or.coremat.lamin-
ations.are.utilized.when.necessary.
In.addition.to.a.thorough.visual.inspection.of.each.
fiberglass component, samples are measured using
special equipment, for fiberglass reinforcement to
resin ratio, laminate configuration, weight and thick-
ness..By.these.procedures.Four.Winns.ensures.
proper.composition.
A. General Maintenance
For.fresh.water.use,.the.boat.should.be.washed.once.
or.twice.a.month..When.using.in.a.salt.water.environ-
ment,.considerable.more.care.will.be.necessary...
Be.careful.when.selecting.a.cleaning.agent..Hand.dish.
Exterior Equipment - Section P
Owner’s Manual Page 0
| Categories | Four Winns Manuals, Four Winns Vista Manuals, Outboard Marine Corporation Manuals |
|---|---|
| Tags | Four Winns Vista 348 |
| Model Year | 2005, 2006 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Boats and Cruisers, Four Winns. For support contact your dealer at http://www.fourwinns.com/locate-dealer.aspx |
| Document File Type | |
| Publisher | fourwinns.com |
| Wikipedia's Page | Outboard Marine Corporation |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)