See your DEALER for proper mounting hardware.
The stern bracket has two holes on each side of the
Bolt your engine to the boat’s transom using the engine. Drill only one hole on each side. Use the
mounting hardware.
upper holes unless your situation requires using the
lower holes. Be sure to drill at right angles to the
transom.
Apply polysulfide sealant generously behind the
heads and to the shanks of the mounting bolts be-
fore inserting them and to the surfaces of washers
that contact the transom. Avoid RTV silicone and
polyurethane sealants as they can be dissolved by
gasoline.
2
3
Secure the engine with the mounting hardware.
After 30 minutes of operation, retighten clamp
screws by hand. DO NOT use tools to tighten clamp
screws. Check clamp screws regularly.
4
1
WARNING
1.
2.
3.
4.
Clamp screws
Transom plate
Retention lug
When replacing bolts, screws, or other fas-
teners, use Evinrude/Johnson parts or parts
of equivalent strength and material.
Mounting hardware
After positioning the engine, use the stern brackets
as a template for location and size of holes to drill in
the transom.
52
- Maintenance
| Categories | BRP Brand Manuals, Johnson 4-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Johnson 8 hp, Johnson R4, Johnson RL4 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Publisher | johnson.com |
| Wikipedia's Page | Johnson Outboards |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)