ADJUSTMENTS
Idle Speed
Steering Friction
The steering friction was set on your new motor be-
fore it left the factory. After the first 10 hours of ser-
vice, check to see that it is still correct; a slight drag
should be felt when turning the motor. If adjustment
is necessary, turn the adjustment screw:
The idle speed adjusting knob is located at the end
of the steering handle. Before turning the knob, be
sure the throttle is at SLOW and the motor has
reached normal operating temperature:
•
•
Clockwise to increase friction
Counterclockwise to decrease friction
•
•
Increase idle speed — turn knob clockwise
Decrease idle speed — turn knob counterclock-
wise
1
1
1.
Steering friction screw
WARNING
1.
Idle speed adjusting knob
If your engine displays poor running quality at idle,
ask your DEALER to perform the necessary adjust-
ments.
DO NOT overtighten for “hands-off” steer-
ing. Reduced steering control could result.
Tilt Friction
The tilt friction nut should be adjusted ONLY
enough to control return of gearcase from tilt to nor-
mal (vertical) position.
1
1.
Tilt friction nut
Maintenance - 39
| Categories | BRP Brand Manuals, Johnson 4-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals |
|---|---|
| Document Type | Boat Motor Manual. Marine Operator's Engine Guide. |
| Tags | Johnson 8 hp, Johnson R4, Johnson RL4 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Publisher | johnson.com |
| Wikipedia's Page | Johnson Outboards |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)