SPECIFICATIONS
SPECIFICATIONS
75,
90 Models
Displacement
Engine Type
79.1 cu. in. (1296 cc)
In-line, 3 Cylinder, Two-Cycle, E-TEC
75 HP – 4500 to 5500 RPM
Full Throttle Operating
Range
90
HP – 4500 to 5500 RPM
75 HP – 75 HP (56 kw) @ 5000 RPM
HP – 90 HP (67.1 kw) @ 5000 RPM
Power(1)
90
Idle RPM in Gear(2)
Idle RPM in Neutral(2)
Ignition Timing(2)
700 ± 50
600 ± 50
Not Adjustable
Emission Control System: ECM, E-TEC (Engine Control Module, E-TEC)
(2)
per SAE J1930
Fuel Requirements(2)
Oil – Lubricant
87 Pump Posted AKI (90 RON) – Refer to Oil and Fuel on
page 15
TC-W3 NMMA-certified oil or Evinrude/Johnson XD100 oil –
Refer to Oil and Fuel on page 15
–
Capacity
2.65 qt. (2.5 l)
Warning Signals
Battery, Minimum
Spark Plug(2)
Controlled by the outboard’s EMM
640 CCA (785 MCA) 12 volt
Refer to ECI Label
Fuses
Refer to Fuse on page 29
In-line Replaceable
Fuel Filter
Battery Charging
Gearcase – Lubricant
25-Amp, Fully Regulated
Evinrude Ultra-HPF™
–
Capacity
L Models – 26 fl. oz. (770 ml)
X Models – 42 fl. oz. (1250 ml)
Power Trim/Tilt – Fluid
Capacity
21 fl. oz. (622 ml)
Propeller
Weight
Refer to Propeller Selection on page 40
L Models – 320 lbs. (145 kg)
X Models – 335 lbs. (152 kg)
Sound at Driver’s Ear
(LpA) ICOMIA 39.94
76.8 dB(A)
Transom Height
L Models – 19 1/2 to 20 in. (495 to 508 mm)
X Models – 24 1/2 to 25 in. (622 to 635 mm)
(1)
(2)
Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
Emission Control Information.
45
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 75 hp, Evinrude 90 hp, Evinrude PL, Evinrude PX, Evinrude SL |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)