2004 Evinrude 75 90 hp E-TEC PL PX SL Outboard Motor Owners Manual

RIGGING  AND ACCESSORIES
Installation
BATTERY
Slide thrust  washer onto shaft  with shoulder
facing aft.
Slide   propeller   onto  shaft,   engaging   the
splines and seating it on the thrust bushing.
Slide spacer  onto the  shaft and  engage the
propeller shaft splines.
Wedge a block of wood between the propeller
blade and the anti-ventilation plate.
Requirements
12-volt, heavy-duty, designated for "marine"
use;
Vented/refillable or maintenance-free; and
Rated  according to  the  minimum  require-
ments in Specifications on page 45.
Deep-cycle  batteries   are  suitable   IF  they
meet or  exceed  the minimum  CCA require-
ments.
Install propeller nut and tighten to a torque of
120-144
in. lbs. (13.6-16.3 N·m).
Install keeper  on propeller  nut, align  keeper
slots and cotter pin hole.
Install new  cotter  pin and  bend ends  to se-    bles or a battery switch.
cure.
Ask  your  Dealer about  your  outboard’s  re-
quirements before installing longer battery ca-
Remove block of wood.  Make sure engine is   Installation
in  NEUTRAL; give  propeller a  spin.  It must
Read and  understand the safety  information
turn freely.
supplied with your battery BEFORE you begin
installation.
Repair
IMPORTANT: Make sure all components are
clean and free of corrosion.
Connect the RED (+) main  cable to the posi-
tive (+) battery post.  Connect the BLACK (–)
main cable to the negative (–) battery post.
If your propeller hits a solid object, the impact
is partially absorbed by the rubber bushing in
the hub  to help  prevent damage  to the  out-
board. A strong  impact can damage the  hub
and propeller blades.  Damage to blades can
cause unusual and excessive vibration. Dam-   If you have marine battery posts,  install each
age to  the hub  can cause excessive  engine   main  cable on the clamp adapter with a star-
RPM with little forward movement.
washer below it.  Install all wires from  acces-
sories on the threaded portion of the post.
IMPORTANT: Avoid or limit operation using a
damaged propeller. Carry a spare propeller.
Keep your propeller in good  condition. Use a
file to smooth  slight damage to blade edges.
See your Dealer for repair of serious damage.
1.
2.
3.
Main cable
Starwasher
Accessory wires
41
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual
Tags, , , ,
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 60 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website