2004 Evinrude 75 90 hp E-TEC PL PX SL Outboard Motor Owners Manual

TROUBLESHOOTING
SYMPTOM
POSSIBLE CAUSE
Starter motor will not operate
• Shift handle not in NEUTRAL.
Fuse blown.
Battery is dead.
Engine will not start
• Not following starting instructions. Refer to Start-
ing, Stopping, Shifting on page 12.
Fuel tank empty.
Fuel hose kinked.
Fuel system contaminated with water or dirt.
Fuel filter obstructed.
Throttle not at IDLE. Return throttle to IDLE.
Spark plugs incorrect. Refer to Specifications on
page 45.
Spark   plugs    improperly   gapped,   carboned,
burned, or wet.
Fuse blown.
Flashing “Water Temp” or  hot light, refer to   En-
gine Monitoring  on page 18 and Engine   Over-
heating on page 20.
Flashing “Check Engine” or “Chk Eng” light, refer
to Engine Monitoring on page 18.
Engine will not idle properly
Engine loses power
• Debris on propeller.
Spark  plugs   damaged  or  incorrect.   Refer  to
Specifications on page 45.
Fuel system contaminated with water or dirt.
• Spark   plugs  damaged   or  incorrect.  Refer   to
Specifications on page 45.
Fuel filter obstructed.
Fuel system contaminated with water or dirt.
Water intakes obstructed and cooling system not
operating correctly. Refer to Engine Overheating
on page 20.
Oiling system malfunction.
S.A.F.E. protection mode activated. Refer to En-
gine Monitoring on page 18.
Engine runs, but makes little or
no progress
• Propeller hub loose, slipping.
• Propeller blades bent or missing.
Propeller shaft bent.
Propeller debris.
Warning system activates
• Refer to Engine Monitoring on page 18.
37
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual
Tags, , , ,
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 60 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website