Product Information
SPECIFICATIONS
40,
50, 60 Models
Displacement
Engine Type
52.7 cu. in. (864 cc)
In-line, 2 Cylinder, Two-Cycle, E-TEC
40 HP – 5000 to 6000 RPM
Full Throttle Operating
Range
50
60
HP – 5500 to 6000 RPM
HP – 5500 to 6000 RPM
Power(1)
40 HP – 40 HP (29.8 kw) @ 5500 RPM
50
60
HP – 50 HP (37.3 kw) @ 5750 RPM
HP – 60 HP (44.7 kw) @ 5750 RPM
Idle RPM in Gear(2)
Idle RPM in Neutral(2)
Ignition Timing(2)
850 ± 50
750 ± 50
Not Adjustable
Emissionper SAE J1930Control(2)System: ECM, E-TEC (Engine Control Module, E-TEC)
Fuel Requirements(2)
87 Pump Posted AKI (90 RON) – Refer to Oil and Fuel on
page 15
Oil – Lubricant
TC-W3 NMMA-certified oil or Evinrude/Johnson XD100 oil –
Refer to Oil and Fuel on page 15
–
Capacity
2.2 qt. (2.1 l)
Warning Signals
Battery, Minimum
Spark Plug(2)
Controlled by the outboard’s EMM
640 CCA (785 MCA) 12 volt
Refer to ECI Label
Fuses
Refer to Fuse on page 31
In-line Replaceable
Fuel Filter
Battery Charging
25-Amp, Fully Regulated
Gearcase – Lubricant
Evinrude Ultra-HPF™
–
Capacity
L Models – 26 fl. oz. (770 ml)
Power Trim/Tilt – Fluid
Capacity
11.7 fl. oz. (345 ml)
Propeller
Weight
Refer to Propeller Selection on page 42
L Models – 240 lbs. (109 kg)
76.8 dB(A)
Sound at Driver’s Ear
(LpA) ICOMIA 39.94
Transom Height
L Models – 19 1/2 to 20 in. (495 to 508 mm)
(1)
(2)
Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
Emission Control Information.
46
| Categories | Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 40 hp, Evinrude 50 hp, Evinrude 60 hp, Evinrude EL, Evinrude PL |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)