ADJUSTMENTS
ADJUSTMENTS
Trim Tab
Improper
WARNING
trim
tab
adjustment
can
cause difficult steering.
A propeller will generate steering torque when
the propeller shaft is not running parallel to
the water’s surface. The trim tab is adjustable
to compensate for this steering torque.
IMPORTANT: A single trim tab adjustment
will relieve steering effort under only one set
of speed, motor angle and load conditions. No Tighten the trim tab screw to a torque of 35-40
single adjustment can relieve steering effort ft. lbs. (47-54 N·m).
under all speed, motor angle and load condi-
tions. If the boat pulls to the left or right when
its load is evenly distributed, adjust the trim
tab as follows:
With the outboard shut OFF, loosen the trim
tab screw. If the boat pulled to the right, move
the rear of the trim tab slightly to the right. If
the boat pulled to the left, move the rear of the
trim tab slightly to the left.
Test the boat and, if needed, repeat the pro-
cedure until steering effort is as equal as pos-
sible.
High motor installations — The trim tab
might be above the water when the motor is
trimmed out. Steering effort might increase.
Steering effort will be reduced if you trim the
motor in and submerge the trim tab.
45
| Categories | Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 40 hp, Evinrude 50 hp, Evinrude 60 hp, Evinrude EL, Evinrude PL |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)