Set Depth Alarm
This function allows for the setting of the Computron ATD's depth alarm. This
function is used to enable an audible alarm that will sound if your boat has ventured
into waters that are at or below the depth that has been set. To change the depth
alarm, press the (SR) button to enter edit mode. The display will begin to blink.
Use the (F⇑) and (F⇓) buttons to change the desired depth. You may enter a
range between 3' and 20'. A setting of "- - - -" will disable the alarm altogether.
When finished, press the (SR) button to save your changes.
NOTE: An "Alarm" on/off switch is located on the Echelon's control panel.
This switch provides you with the ability to temporarily disable the audible
alarm for the depth meter if you will be operating your boat in shallow waters
for a short period of time.
Tachometer
Set Speed
This function will display a digital readout of the engines current R.P.M.'s.
This function provides the driver with the ability to set a desired speed for the boat.
This function works in conjunction with the graphic speed analyzer display
discussed earlier. To change the desired speed setting, press the (SR) button.
The display will begin to blink. Use the (F⇑) and (F⇓) buttons to change the desired
speed setting. When finished, press the (SR) button to save your changes.
Speedometer
Stop Watch
This function will present a digital readout of the boat's current speed. Adjustment
of the speed can be performed using the adjustment knob located on the control
panel.
This function provides competition level skiers with a ten segment digital
stopwatch. To use the stopwatch function, press the (SR) button to reset the
stopwatch to zero. When ready, press the (SS) button to begin the timer on the
first segment. Press the (SS) again to start timing the second segment. You can
time up to ten segments by pressing the (SS) button for each segment. Pressing
the (SR) button will stop timing the tenth segment and will place the stop watch in
"Review" mode. While in "Review" mode, pressing the (F⇑) and (F⇓) buttons will
allow you to scroll through each of the ten segments. Note that the stop watch will
continue to operate at all times while viewing or changing other functions and can
be stopped at any time by pressing the (SS) button. However, the stopwatch can
only be reset to zero when in the stopwatch function.
Demo Mode
This function is provided to allow dealers and owners to demonstrate the functions
of the Computron ATD system while the boat is out of the water. To start the
"Demo" mode, simply press and hold the (F⇑) and (F⇓) switches on the Ignition
Control Panel while turning the ignition switch from the "Off" position to the
"Accessory" position. Please note that the (F⇑) and (F⇓) buttons on the steering
wheel panel cannot be used to place the Computron system into the "Demo" mode.
The Computron display will acknowledge that you want to enter the demo mode by
displaying "LET GO". At this time simply release the (F⇑) and (F⇓) buttons. All
functions on the Computron ATD system are available with the following
exceptions:
1) The depth meter is fixed at 15 Feet.
2) The tachometer display can be varied from between 700 and 6000 RPM by
turning the "Display Brightness Knob" on the Ignition Control Panel.
3) The Speedometer display can be varied from 8 to 50 MPH by turning the
"Display Brightness Knob" on the Ignition Control Panel.
To exit the demo mode simply turn off the ignition switch. When you turn the
system on again, it will be in the normal operation mode.
CAUTION: DO NOT USE THE DEMO MODE WHILE THE ENGINE IS RUNNING.
25
| Categories | Malibu Manuals |
|---|---|
| Model Year | 1993, 1994, 1995, 1996 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Marine readers have rated Malibu Boats Operation and Maintenance Manual 4.5 out of 5.0 based on 2 product reviews. 4 stars...need info on how to operate a Malibu 20 footer.
nice manual