127(
These four buttons have corresponding switches located on the control panel. The reason for this is
that the buttons located on the steering wheel are powered by a 9-volt battery located in the steering
wheel's front panel directly behind the buttons. These separate switches are provided in the event
the battery should lose power during a competition.
$YDLODEOH)XQFWLRQV
The Computron ATD system provides the driver with complete control over 12 separate functions. The
Computron ATD's functions include the following in order of display mode:
Banner
This function causes the Computron system to display the text "CUSTOM BUILT
FOR YOUR NAME" when power to the boat is provided. You can change the
display of "YOUR NAME" to any 12 digit alpha-numeric characters. To do so,
press and HOLD the (SS) button while the banner is displayed. The Computron
system will acknowledge that you wish to change the display by displaying "LET
GO". At this time simply release the (SS) button. This will place the Computron
system in "Edit" mode. Once in the "Edit" mode, press the (F⇑) to scroll the display
forward from A to Z, 0 to 9, and then a blank space. Press the (F⇓) button to scroll
the display backward from a blank space, 9 to 0, and then A to Z. Pressing the
(SR) button will move to the next character in the display to allow editing. Pressing
the (SS) button will save your changes and exit the "Edit" mode. Pressing the
Alarm Off switch will discard your changes and exit "Edit" mode. To reset the
display to "YOUR NAME" simply press and hold both the (SR) and (F⇑) buttons
while turning the ignition switch from the "Off" position to the "Accessory" position.
The Computron system will acknowledge that you wish to change the display to
"YOUR NAME" by displaying "LET GO".
Depth Meter
This function provides a digital readout of the water's current depth.
Sea Temperature
This function provides a digital display of the temperature of the water surrounding
your boat.
Air Temperature
Digital Clock
This function provides a display of the temperature of the air.
This function provides a display of the current time. To set the clock, press the
(SR) button. The display will begin to blink. Once it is blinking, use the (F⇑) button
to change the hours and press the (F⇓) button to change the minutes. Once time
is set correctly, press the (SR) button to save your changes. The display will then
stop blinking and the clock has been set.
Voltmeter
Engine Hours
Trip Log
This function displays a digital readout of the battery's voltage. The voltmeter
indicates whether the battery is charging or discharging. The display should read
approximately fourteen volts while the engine is running.
The engine hours display acts as an odometer for the engine. Engine hours should
always be noted so maintenance an lubricant changes may be performed at proper
intervals.
This function displays and allows the reset of the Computron's mileage trip log. To
reset the trip log, press the (SR) button.
24
| Categories | Malibu Manuals |
|---|---|
| Model Year | 1993, 1994, 1995, 1996 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Marine readers have rated Malibu Boats Operation and Maintenance Manual 4.5 out of 5.0 based on 2 product reviews. 4 stars...need info on how to operate a Malibu 20 footer.
nice manual