2011 Evinrude 65 hp E-TEC WRL WRY Commercial Outboard Boat Motor Owners Manual

   Product Information
IDLE RPM IN GEAR
The idle RPM in gear setting can be adjusted,
if desired, to provide more idle control,  steer-
ing, and quietness in certain applications.
ADJUSTMENTS
High outboard installations  — The
trim
tab might  be above the  water when the  out-
board is trimmed out. Steering effort might in-
crease. Steering effort  will be reduced if  you
trim the  outboard  in and  submerge the  trim
tab.
IMPORTANT:  Only your  Dealer  can  adjust
the idle RPM in gear setting.
FRICTION
TRIM TAB
WARNING
Improper  trim   tab  adjustment  can
cause difficult steering.
1
A propeller will generate steering torque when
the propeller  shaft  is not  running parallel  to
the water’s surface. The trim tab is adjustable
to compensate for this steering torque.
IMPORTANT:  A single  trim  tab  adjustment
will relieve steering  effort under only one set
of speed, outboard angle and load conditions.
No single adjustment can relieve  steering ef-
fort under all speed, outboard angle and load
conditions. If the boat pulls  to the left or right
when its load is evenly distributed, adjust  the
trim tab as follows:
2
With the outboard shut OFF, loosen the trim
tab screw. If the boat pulled to the right, move
the rear of  the trim tab slightly  to the right. If
the boat pulled to the left, move the rear of the
trim tab slightly to the left.
1.
2.
Throttle friction screw
Steering friction screw
Throttle Friction   — Adjust   until    a   slight
drag is felt when accelerating or decelerating
only. DO NOT overtighten.
Steering Friction   — The   steering   friction
was  set on  your outboard  at  the factory.  A
slight drag should be felt when turning the out-
board with the steering  handle. If adjustment
is necessary, turn the adjustment screw:
Clockwise to increase friction; or
Counterclockwise to decrease friction.
WARNING
Tighten the trim tab screw to a torque of 35-40
ft. lbs. (47-54 N·m). Test the boat and, if need-
DO NOT overtighten for “hands-off”
ed, repeat  the procedure until steering  effort    steering.  Reduced  steering  control
is as equal as possible.
could result.
50
Product Specification
CategoriesBRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual
Document TypeBoat Motor Manual. Marine Operator's Engine Guide.
Tags, , ,
Model Year2011
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 72 pages
Document File TypePDF
Publisherevinrude.com
Wikipedia's PageEvinrude Outboard Motors
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website